Armstrong Ceiling Solutions

Armstrong Ceilings help bring a new lease of life to a tired office building

  • 4 Oct 2018

A mix of metal and mineral systems from Armstrong Ceilings has helped to transform a tired office block opposite Victoria station in London into a stunning mixed-use building.

MAX architects, a first time First-time Armstrong specifier, chose them to differentiate from the more traditional Category A fit-outs elsewhere in the Victoria regeneration area, as well as for their high quality and flexibility.

Armstrong’s perforated metal D-Clip island or floating ceilings in RAL 9022 (pearl light grey), a modern and modular absorber solution for exposed concrete ceilings, feature on all six office floors (11,000 square metres), while white mineral Ultima+ 600mm x 600mm boards in an exposed 24mm grid were used in the back-of-house areas.

The redevelopment of 25 Wilton Road for client Royal London Asset Management has raised the bar by delivering a refurbishment project that performs both commercially and functionally in the same way as a prime commercial new-build.

At the same time as retaining the post-tensioned concrete frame of the structure, the project incorporates three new lightweight steel floors of 14 high-quality rental apartments (4,000 square metres) into a building previously used exclusively for commercial purposes, leading to social and environmental benefits for the area.

The existing concrete structure has been retained, bold new articulated facades transform the building’s relationship with its strategic location. It appears to subtly transform as one moves around it, revealing a depth of facade through striking cobalt-blue folds.

The ‘fanned’ bays, along with the infill of the six floors of existing atria, considerably increase the lettable area and the light levels within a new set of highly-flexible and efficient office floor plates. Ground-level retail, café and lobby spaces enliven the streetscape.

MAX architect Ashley Gilbert commented: “The scheme set out to provide prime grade flexible office space designed to appeal to a wide range of user profiles. The idea was to differentiate the space from the more traditional Category A fit-outs being delivered elsewhere within the wider Victoria regeneration area.

“The high quality and flexibility of the Armstrong metal D-Clip island ceiling allowed us to accomplish this.

“The office floorplates employ an innovative hybrid system, running conventional services around a perimeter racetrack of perforated aluminium suspended ceiling tiles.

“At the same time, the approach carefully reveals a select palette of visible services in areas of exposed ceiling, where the original post-tensioned slabs are exposed and used to provide 3.3m floor-to-ceiling heights.”

The Armstrong ceilings were installed for main contractor Kier, who replaced all of the M&E systems in the building, by specialist sub-contractor Roskel Contracts who had a team of up to 20 operatives on site for 11 months. The Ultima+ board tiles are Cradle to Cradle™ certified and perform to Sound Absorption Class A with 87% light reflectance.

Armstrong solution design manager Nick Harper explained: “The original design intent from the architect was to create multiple metal rafts which would span across the whole ceiling within the office spaces to help cover up the exposed soffit and any M&E services.

“Numerous discussions and design proposals had been put forward with the ceiling options swaying towards either F-H 600 panels, D-H 700 hook-on metal rafts or D-Clip clip-in metal rafts.

“Due to the number of services behind the rafts, which required regular access, it was decided that the D-Clip system would be best suited for this application.

“This was due to the fact that the panels can swing down on the grid without having to fully remove the panels and bring them down to the ground.

“Another advantage to this system is that the grid is almost completely hidden behind the ceiling panels. The only visible grid would be the threaded rods to the soffit.”

Roskel Contracts’ MD Tony Partridge said: “It was easy to construct once you understood the system. The tiles were very durable considering the amount of times they were removed for the M&E works.

“95% of them had to be removed immediately after fixing and reinstalled some months later, then approximately 25% were taken out again and reinstalled.”

Ashley Gilbert added: “The design team was initially tasked with creating initiatives to add value to the building through improvements to the landlord areas.

“Accordingly, the project started out as a circa £5 million light-touch refurbishment. However, we soon recognised the potential for increasing the volume and height of the building and adding a new residential use.

“The value created by introducing three floors of rental apartments on top of the existing structure fundamentally changed the development appraisal and enabled a comprehensive cut-and-carve of the existing office and commercial areas.

“The brief therefore evolved to include the creation of a prime office development and high-end apartments, as well as mixed-use space at street level, all to be delivered in a highly sustainable way.

“Leveraging a shift in attitudes to holding residential assets for the longer term, we created a horizontally-layered mixed-use building with residential above office and retail.”

Matt Bird of Royal London Asset Management said: “Our vision and collaborative approach with our architect, consultants and contractors has enabled us to deliver considerable added value and excellent returns on investment for our customers from a tired office building on a tight central London site. 25 Wilton Road adds another strong asset to RLAM’s growing property portfolio.

“By re-using the existing structure, adding a new mix of uses and taking a creative architectural approach we have created a unique product in a thriving area of London, giving the building a new lease of life.

“At the same time, we have demonstrated our skill at maximising the value of our assets by being creative, ambitious and bringing together the right team.”

The site of 25 Wilton Road was highly constrained, being sandwiched between two “red routes” (major central London roads on which stopping is normally prohibited) as well as two listed buildings.

It is also surrounded by six Conservation Areas, had the Apollo Theatre as a neighbour and an operational pub on the ground floor, meaning the windows of time available for construction were highly restricted.

Contact:

Armstrong World Industries Limited
Harman House,
2nd Floor,
1 George Street,
Uxbridge UB8 1QQ
0800 371849

email: [email protected]  

Visit Armstrong Ceiling's website

Leave a Reply

Latest news

Renderplas

Renderplas shadow gap beads throw shade

For architects and designers looking to avoid traditional skirting boards, architraves and cornices, Renderplas offers its range of PVC plasterboard shadow gap beads for dry lining systems.

Posted in Articles, Building Industry News, Building Products & Structures, Floors, Interior Design & Construction, Interiors, Posts, Render, Restoration & Refurbishment, Retrofit & Renovation, Walls

MCRMA

First MCRMA members’ roadshow takes place at Siderise

Members of the MCRMA, the trade association for the metal cladding and roofing industry, had an exclusive opportunity to explore and discuss the changes affecting the construction sector at the first of the association’s roadshow events hosted by Siderise at its HQ and manufacturing facility in South Wales.

Posted in Articles, Building Associations & Institutes, Building Industry Events, Building Industry News, Building Products & Structures, Building Regulations & Accreditations, Building Services, Cladding, Exhibitions and Conferences, Health & Safety, Restoration & Refurbishment, Retrofit & Renovation, Seminars, Walls

BMBI
Hambleside Danelaw

Hambleside Danelaw: Innovation to Installation - MidVerg20®

Hambleside Danelaw’s MidVerg20® interlocking verge system was manufactured to suit all flat intermediate gauge single-lap interlocking tile types, and can be installed on both new builds and refurbishments.

Posted in Articles, Building Industry News, Building Products & Structures, Building Services, Innovations & New Products, Posts, Restoration & Refurbishment, Retrofit & Renovation, Roofs