Hydro-Brake helps flood defences hold despite torrential rains
Hydro-Brake® Flow Controls
Two giant Hydro-Brake® Flow Controls, installed as part of a £12m EA Flood Alleviation Scheme, helped to protect over 3,000 homes near Wigan.
The first major test with recent torrential downpours filled its radical new flood storage area.
- more than 100 mm of rain, equivalent to one month’s rainfall, fell in just a few hours in the North of England during one weekend in June.
- over 3,000 homes were protected from flooding by Environment Agency defences, including those at Wigan
At the centre of the dam, just a mile from the town centre, two giant Hydro-Brake® Flow Controls successfully held back flood waters in the carefully-engineered flood storage area extending one kilometre along the steep-sided river valley.
Keith Roddy, Project Team Manager for the Environment Agency commented, ’The Flood Alleviation Scheme was designed to protect 610 properties downstream in Wigan town centre’.
- 2 m diameter Hydro-Brake® Flow Controls are the centrepiece of an 8 m high dam, 120 m wide and 120 m long
- dam creates a potential 370,000 cubic metres of flood storage extending along a kilometre of the Douglas valley
- in the event of a major flood, water is held behind the dam to reduce the chance of flood defences in Wigan being overtopped
- excess water is then stored in the valley upstream from the dam and after a flood, the stored water is slowly released back into the river until normal river levels are achieved
- scheme significantly reduced the extent of flooding in the town centre, protecting homes and businesses previously at risk
Alex Stephenson, UK Director for Hydro International’s Stormwater Division explains: ’The Wigan scheme is one of the largest and the most innovative flood storage projects of its type anywhere in the world.
The use of Hydro-Brake® Flow Controls was vital to the project because they could be precision engineered to ‘fine-tune’ the flood storage capacity.
’We also developed a new design of Hydro-Brake®Flow Control with an adjustable intake specifically for this project to ‘future-proof’ the dam and allow adjustment in the light of major experiences such as this one.
’The addition of specially-designed restrictor plates on the Hydro-Brake® Flow Controls’ intakes enable the flow rate from the outfall to be adjusted by plus or minus 20% in the future.
’The cone-shaped geometry of the Hydro-Brake® Flow Control allows water to flow through the device unimpeded until it reaches a pre-determined head.
At this point a self-activating vortex is triggered which throttles back the flow and releases it at a strictly controlled flow rate.
’The Hydro-Brake® Flow Controls also have a much wider aperture than conventional valve or penstock solutions, reducing the risk of blockage from debris. This would have been a major advantage during the recent flooding’.
The Wigan flood storage project was the second phase of the Environment Agency’s flood alleviation scheme at Wigan.
Phase one, completed in 2008, involved the raising of defences along the River Douglas.
The completed dam and flood storage has been landscaped and made attractive for visitors as part of a green corridor running from the town centre through to Haigh Hall Country Park.
For more information about Hydro-Brake® Flow Controls contact any of Hydro’s sustainable solutions for stormwater control and treatment, please call 01275 337977, email email@example.com or visit the website via the link above.
Client: - Environment Agency
Consultant - Jacobs Engineering
Contractor - Galliford Try