Product category:
Heating Systems, Controls and Management
News Release from: ABB | Subject: Standard drive for HVAC
Edited by the Buildingtalk Editorial
Team on 22 June 2004
Maintenance Assistant Embedded In HVAC
Drive
ABB's standard drive for HVAC now features a maintenance assistant, improving the performance and reliability of the HVAC system.
ABB's standard drive for HVAC now features a maintenance assistant This helps the user schedule maintenance of the drive and its associated equipment in stand-alone applications where no BMS system is installed, improving the performance and reliability of the HVAC system
This article was originally published on Buildingtalk on 5 Apr 2004 at 8.00am (UK)
Related stories
ABB Drive Cuts £5,000 Off Swimming Pool Costs
An ABB drive is set to save a holiday park nearly £5,000 on the annual electricity cost for its indoor swimming pool.
ABB Motors And Drives Arrive Just in Time
Matched pairs of ABB high efficiency motors and drives will reduce energy consumption at the new Coventry Hospital by over 1,400 MWh per year for the ventilation system in block A.
The maintenance assistant can prompt users to commission maintenance within specific time intervals, after a set number of running hours or when equipment fails to meet performance criteria.
An air-handling unit will for instance draw more current as dust builds up inside.
If the unit normally draws 35A with a clean filter, the maintenance assistant can prompt the user to replace the filter when the consumption reaches 42A.
Further reading
Brass Foundry Saves £130,000 With ABB Drives
Installing ABB variable speed drives has saved a brass manufacturer £130,000 a year in energy costs.
Metering Extension Modules For Distribution Boards
Extension modules fitted with ABB's state of the art Deltaplus meter enable installers to meet the sub-metering requirements of new Building Regulations 2000
High Voltage Motors Are Standardised For OEMs
A new range of standard high voltage induction motors, ready for delivery within days, has been launched by ABB.
The maintenance assistant can also keep track of bearing and drive belt replacement intervals, as well as lubrication intervals for the driven equipment, either by monitoring the motor running hours or the number of motor revolutions.
Dust may also build up inside the drive itself, obstructing airflow, which can cause components to overheat.
It is therefore prudent to clear out the dust a few times a year, which the maintenance assistant can prompt the user about.
"Filter replacement in air-handling units is sometimes overlooked, reducing the quality of the indoor air over time," says Nick Thorne, sales manager for HVAC drives at ABB.
"The replacement intervals can now be monitored by the drive, whereas previously, a BMS system would have been required to do the same thing." "Maintenance of the drive itself is something that many users ignore until the day the drive overheats and trips," Thorne continues.
"To prevent a total shutdown of the air conditioning system on a hot summer's day, it is a good idea to give the drive some basic maintenance." ABB recommends that the drive is serviced once about every twelve months, depending on the amount of dust in the atmosphere where the drive is fitted.
The cover should be removed and dust extracted with a vacuum cleaner.
All electrical connections should be checked for tightness and the fan established to be in working order before the cover is put back on.
It is also a good idea to have a note of the original drive settings and ensure that these have not been changed.
Regular replacement of filters in air-handling units prevents the spread of airborne contaminants.
Blocked filters reduce the airflow, enabling the build-up of dirt and microbes inside the ventilation ducting.
It is estimated that bad indoor air causes 30% of all allergic diseases and 15% of all sick leave*.
The maintenance assistant in ABB's new HVAC drive is extremely easy to set up, with an operator interface that can be navigated as simply as a mobile telephone.
The detachable, multi-lingual alphanumeric control panel features two soft keys, the function of which is shown on the display, depending on the panel status.
Should the user lose their way at any point, a built-in "Help" button brings on-screen advice.
The ABB standard drive is the first on the market to carry this feature.
The panel can be used for copying parameters between some of the ABB standard drives range.
* Source: Finnish Society for Indoor Air Quality and Climate.
• ABB: contact details and other news
• Email this article to a colleague
• Register for the free Buildingtalk email newsletter
• Buildingtalk Home Page
Search the Pro-Talk network of sites
