Design program for punching shear reinforcement

Ancon Shearfix is installed within a concrete slab to reinforce column heads against punching shear.

Ancon Shearfix is installed within a concrete slab to reinforce column heads against punching shear.

Its use negates the need for any localised thickening of the slab with features such as downstand beams or enlarged column heads.

Shearfix consists of double-headed steel studs welded to flat rails.

The optimum stud centres and rail layout can be determined by calculation or more easily with Ancon's free design software, available to download from their website.

Unique to the Ancon program, designers are able to generate both an orthogonal and a radial rail layout, ensuring specification of the most cost-effective solution.

Dennis Ansell, Ancon's Technical Services Manager explains "Whilst working closely with concrete designers it became apparent there was a need for more intelligent design software".

"The Ancon Shearfix program provides more flexibility in system design".

"Users have found cost savings and on-site installation benefits when switching from an orthogonal to a radial layout and vice versa, depending on the specific details of the application".

Other features of the Ancon program include a printable datasheet of the designed system and its export as a DXF file allowing placement directly into building plans.

In addition this program allows the design of punching shear reinforcement to BS8110-1, DIN1045-1 and AS3600.

For more information on Shearfix and its associated design program contact Ancon's 'Products for Structural Concrete' Team.

Back to top