Product category:
Fire and Smoke Protection, Detection and Alarms
News Release from: Apollo Fire Detectors | Subject: Mini Switch Monitor
Edited by the Buildingtalk Editorial
Team on 26 February 2008
Mini Switch Monitor is ideal for limited
spaces
Measuring just 39mm x 39mm x 20mm, the new Mini Switch Monitor from Apollo Fire Detectors is a miniature interface with an entirely new housing ideal for installation in equipment with limited spaces.
It can also be mounted within enclosures such as manual call points The unit is designed to monitor the state of one or more single-pole, volt-free contacts and reports the contact status to Apollo-compatible control panels
It can also be fitted onto a standard 35mm DIN-rail using a twist and click motion (patent applied for) and has a short-circuit isolator as standard.
The Mini Switch Monitor can be used as either an interrupt or non-interrupt device, the former meaning it can be used where a priority response is required - in particular for monitoring either an individual or a zone of conventional manual call points.
As well as 'normal', 'fault' and 'alarm' states, the unit also provides a 'pre-alarm' state, allowing the investigation of a potential alarm so as to prevent false alarms from occurring.
• Apollo Fire Detectors: contact details and other news
• Email this article to a colleague
• Register for the free Buildingtalk email newsletter
• Buildingtalk Home Page
Search the Pro-Talk network of sites
