Product category:
Technical Equipment
News Release from: AV Technology | Subject: Strain gauge support
Edited by the Buildingtalk Editorial
Team on 03 August 2007
Strain gauge support from AV Technology
On-site strain gauging carried out by industrial consultants AV Technology provides vital support information during complex jacking procedures.
On-site strain gauging carried out by industrial consultants AV Technology (AVT) is playing a vital role in two quite different applications at opposite ends of the country The gauges have been applied to 'Megashore' structural support props to monitor the axial compressive loads during complex jacking procedures being carried out by hydraulic movement specialists Bill Boley
This article was originally published on Buildingtalk on 29 Jul 2008 at 8.00am (UK)
Related stories
Software for analysing ground-borne vibration data
Leading industrial consultants AV Technology have developed proprietary software for analysing ground-borne vibration data and presenting results in line with relevant standards.
Acoustic levels in schools to meet new legislation
AV Technology complete full acoustic noise survey for contractors refurbishing a school so they meet new legislation standards.
AV Technology (AVT) have extensive experience in the on-site application of strain gauges to a diverse range of structures and components.
In the first application, AVT engineers have strain gauged 48 props which are being used during major refurbishment work being carried out at junction 13 on the M4 in Berkshire, adjacent to Chieveley Services.
A crucial part of the project has involved replacing all the support piers and during this work the motorway deck has been supported by twenty four 300 tonne jacks mounted in pairs on top of the strain gauged supports in close proximity to the piers being demolished.
Further reading
Safe working during nuclear plant decommission
Complex structural monitoring program by leading industrial consultants AV Technology helps maintain safe working conditions during nuclear plant decommissioning.
Noise compliance tests on sustainable homes
AV Technology have recently carried out noise compliance tests on four eco or sustainable homes built by the Eden Housing Association in Cumbria.
Silo-Weigh weight data for Lafarge-Roofing
AV Technology's innovative Silo-Weigh retrofit weighing system is playing an important stock management role at Lafarge Roofing plant.
During the demolition and rebuild process it is important for engineers to be aware of any movement in the foundations, which could have an impact of the integrity of the overall bridge structure.
Untoward changes in axial loads in the props are indicative of movement and the system is configured so that data can be remotely accessed on a regular basis.
In the second application, eight similarly strain gauged 'Megashore' props are recording data during construction of the so-called Chips building on the New Islington Millennium Village site in East Manchester.
When completed, this somewhat bizarre building, designed by the flamboyant architect Will Alsop, will comprise 145 one, two and three-bedroom apartments.
At nine storeys high, it gets its name from the way it zigzags along the edge of the Ashton Canal as a group of three-storey elements or 'Chips' stacked on top of each other.
At one end of the building the middle three-storey element is cantilevered out by thirteen metres and the props are part of the complex support structure being deployed during construction.
Bill Boley have installed eight 100 tonne jacks, in two sets of four on top of the strain gauged props, and are using the load data from the strain gauges to monitor the loading as the building work progresses.
(On completion, when the jacks are lowered, the whole cantilevered section has been calculated to drop by 30 mm.) In both applications, the props have been strain gauged on site using encapsulated gauges in full bridge configurations, with wiring back to the Bill Boley instrumentation.
Unlike laboratory strain gauging, on-site strain gauging requires a very different approach, especially in terms of bonding, sealing and wiring.
Reliability is of paramount importance and such installations must be capable of withstanding the harsh environments experienced on construction sites together with external weather conditions.
The strain gauged support structures act like giant load cells and provide axial load information via Campbell Scientific data loggers with built-in modems.
This remote monitoring capability allows long-term load trends for both projects to be monitored remotely by AVT and Bill Boley .
In addition the 'text message' alarm feature automatically warns designated recipients of any out-of tolerance load excursions. Request a free brochure from AV Technology ...
• AV Technology: contact details and other news
• Email this article to a colleague
• Register for the free Buildingtalk email newsletter
• Buildingtalk Home Page
Search the Pro-Talk network of sites
