Comar provides aluminium door systems

Comar installs aluminium commercial door systems throughout the UK.

The company's extensive profile range provides combinations such as sliding, folding, rebated, swing, armoured glass (AG) and pivot doors.

Three ranges are available: Comar 7, Comar 7 High-Performance Tempest and Comar 7Pi polyamide doors.

Comar 7Pi provides durability and maximum thermal efficiency that exceeds the requirements of Document L.

Comar 7 is face drained and has a variety of drained or non-drained thresholds, including low ramp thresholds to comply with building regulations such as the Disability Discrimination Act (DDA).

With an extensive range of door stiles with sight lines ranging from 28mm to 110mm and rails from 10mm to 200mm, which can be internally or externally beaded, Comar 7 provides the capability to achieve durability and visual appeal.

These profile options allow construction of combinations of single-leaf doors up to 1,200mm wide and 2,300mm high.

Dependent on the location, glass type, hardware and door type, larger configurations, such as vehicle access sliding doors can be manufactured.

Advice is available from Comar's technical department for specific projects.

Doors can be glazed with panels or glass up to 51mm.

Comar 7 also provides a range of automatic door beams.

These door beams are a single extrusion that supports automatic door gearing.

They offer maximum strength while enhancing the appearance of sliding or swing doors by reducing the need for unsightly aluminium panels and timber packing.

Comar 7 auto door beams have been designed to accept virtually all types of bolt-on operating gear.

Comar 7 integrates into Comar's ground floor framing, curtain walling suites and couples to window suites to provide fixed and opening fan and side-light options.

Comar 7 Tempest doors have exceeded the requirements of BS 6375 reporting no water leakage at 1,200pa.

Comar 7 utilises Axim architectural hardware.

The Axim range includes transom closers, panic devices, flush bolts, letter-plates, locks, paddle handles and lever handles, which can be delivered in a variety of finishes, including co-ordinating polyester powder coating.

Back to top