Dimplex unveils wall mounted radiator range

Dimplex is expanding its low carbon heating range with the launch of Smartrad wall mounted fan convector radiators.

Smartrad radiators offer a responsive and energy efficient alternative to underfloor heating or conventional radiators for heat pump systems.

The Smartrad range is suitable for either installations in existing buildings as a compact and energy efficient alternative to conventional radiators, and also for new builds, offering specifiers a more responsive alternative to underfloor heating.

Smartrad offers a high performance at water temperatures as low as 40C, making it suitable for use with heat pumps as part of a complete renewable energy system, by allowing CoP to be optimised to reduce running costs and CO2 emissions.

For properties with condensing boilers, the lower flow temperatures allow the boiler to operate in its most effective range.

Smartrad is currently available in a stylish twist to the classic metal radiator design and soon the options of elegant white or black glass finishes will be added to the range.

Smartrad contains less than three per cent of the water volume of a conventional steel radiator, has a low thermal mass and a room warm-up time around four times faster than a conventional radiator with comparable output.

It also responds quickly to changes in room temperature from incidental heat gains, such as solar gain.

Tests have indicated that Smartrad uses 75 percent less energy than a standard radiator with comparable output to bring a room from 15C to 21C.

Integral electronic thermostatic control gives automatic control over fan speed output and room temperature stability.

As the room temperature nears the desired point, fan speed is reduced and the ambient temperature closely monitored to an accuracy of within one degree Celsius.

Smartrad is compatible with optional plug-in 24 hour or seven day programmers to tailor the functionality.

The range is available in four sizes, with nominal outputs ranging from 0.8kW to 1.8kW.

Weights for the range start at 12kg, and installation is straightforward using 15mm compression fittings.

Plumbing connections can be right or left hand for maximum flexibility.

An air bleed valve ensures efficient operation by avoiding air pockets.

All models in the range have dimensions of 500x140mm with width varying from 500 to 910mm, dependent on output.

Back to top