Product category:
Building Industry QA and Benchmarks
News Release from: Elcometer Instruments | Subject: Elcometer 7410 Concrete Moisture Meter
Edited by the Buildingtalk Editorial
Team on 11 January 2006
Elcometer 7410 Moisture Meter
Elcometer announce the launch of the Elcometer 7410 Concrete Moisture Meter.
Elcometer announce the launch of the Elcometer 7410 Concrete Moisture Meter Excessive moisture in or permeating from concrete after application of a coating or covering with sheet material can cause failures such as condensation, blistering, delamination, movement and general deterioration
This article was originally published on Buildingtalk on 1 May 2006 at 8.00am (UK)
Related stories
Elcometer now testing concrete for salt
Elcometer announce that they have developed a test kit for use with coatings on concrete.
The Elcometer 7410 Concrete Moisture Meter is specifically calibrated for use on concrete, so there are no complicated conversion calculations or confusion over which scale to read.
The Elcometer 7410 is an accurate and easy to use non-invasive instrument for non-destructive measurement of the moisture content in concrete.
The dial is graduated from 0% to 6% for concrete readings, while the lower scales are used to obtain comparative or qualitative moisture readings for gypsum and other floor screeds.
Measuring down to a depth of 125mm / 5 inches, the Elcometer 7410 will enable you to see if it is safe to apply a coating or floor covering.
By making easy to use products to specifically meet your requirements at all stages of your inspection process, our aim is to save you time and money.
Visit www.elcometer.com to explore our extensive product range for all your non-destructive testing needs.
• Elcometer Instruments: contact details and other news
• Email this article to a colleague
• Register for the free Buildingtalk email newsletter
• Buildingtalk Home Page
Search the Pro-Talk network of sites
