Visit the Wernick Buildings web site
Click on the advert above to visit the company web site

Product category: Hardware
News Release from: European Safety Systems | Subject: Safe sounders and beacons
Edited by the Buildingtalk Editorial Team on 28 March 2005

Intrinsically Safe sounders and beacons

Request your FREE weekly copy of the Buildingtalk email newsletter. News about Hardware and more every issue. Click here for details.

Improved and cost reduced new generation of Intrinsically Safe sounders and beacons has been launched.

E2S has announced updated versions of its Intrinsically Safe sounder and beacon featuring improved functionality and lower cost The new three-stage IS-A105N and the IS-L101 high intensity LED beacon are approved to EN50020: 2002 for use in Zone 0, 1 and 2 Gas Group IIC environments

The sounder now has 49 user-selectable 3 stage alarm tone configurations with an output of 105dB(A) @1m; a 4MHz clock ensures that the outputs from all sounders on a loop are fully synchronised.

The IS-L101 beacon uses an array of ultra bright Amber, Red, Blue or Green LEDs to produce a bright flashing warning signal in hazardous areas, giving a far more effective visual warning than traditional Xenon tube beacon alternatives.

The IS-L101 can be used in conjunction with the IS-A105N sounder, powered through the same Zener barrier or galvanic isolator and mounted together or separately.

An "alarm accepted" facility enables the sounder to be silenced for between one and thirty minutes.

When coupled to a sounder, the L101-IS flashes at 1Hz, increasing to 2Hz when the sounder is silenced.

The IS-A105N measures 130mm square, the IS-L101 86mm square, both are sealed to IP66 and typically draw 25mA from 24VDC when powered via a 28V 300 Ohm Zener barrier.

European Safety Systems: contact details and other news
Email this article to a colleague
Register for the free Buildingtalk email newsletter
Buildingtalk Home Page

Search the Pro-Talk network of sites

Visit the Wernick Buildings web site