Product category:
Hardware
News Release from: Ethernet Direct | Subject: Gigabit ethernet workgroup switch
Edited by the Buildingtalk Editorial
Team on 27 July 2007
Managed gigabit ethernet workgroup
switch
Ethernet Direct introduces cost competitive stackable workgroup switch that offers reliable connection to the backbone network.
The growth of Ethernet devices on the plant floor will mean greater amounts of communication consuming available bandwidth Data from the plant floor will feed up to SCADA and Enterprise systems, while Application Servers will provide distributed information down to coordinate automation systems
This article was originally published on Buildingtalk on 23 Aug 2006 at 8.00am (UK)
Related stories
Ethernet Direct alliance with Network Vision
Ethernet Direct Corporation announce the alliance partnership with Network Vision, known for the popular Network Management software, IntraVUE.
Husky industrial ethernet switch goes gigabit
Ethernet Direct Corporation has released Husky Series Industrial Managed Gigabit Ethernet Switch.
Multicast messages and Peer-to-Peer synchronization will generate additional traffic as more real time applications are run over Ethernet.
In order to provide an infrastructure that will handle this increasing traffic you need to consider using Gigabit connections at critical connections.
Ethernet Direct has a full line of Gigabit solutions that allows users to build your systems with rugged reliable Gigabit Ethernet Switches that will provide years of reliable operation and able to handle your network loading in the future.
Further reading
Managed industrial ethernet switch
Ethernet Direct presents its Managed Industrial Ethernet Switch, HME-800, HME-621 and HME-623 Series for mission-critical applications.
Husky series industrial ethernet switch
Ethernet Direct Corporation announce that the Husky series industrial ethernet switch is now compatible with Auto-IP, a management software.
Ethernet Direct offers managed switches which have 24 ports of 10/100/1000TX with 4 SFP (Small Form-Factor Pluggable) that will allow you to mix both Single-Mode or Multi-Mode fiber.
These are full SNMP managed switches intended for the control room environment but can be used in production areas in the Pharmaceutical and Electronics plants.
The Jaguar JMG-24F4 Managed Gigabit Ethernet Workgroup switch is a very powerful yet flexible multi-layer switch which delivers maximum throughput to high density workgroups at the edge or in the backbone of any network environment.
The non-blocking design of the switch delivers simultaneous, full wire-speed, low-latency throughput to all ports.
In addition, the 1U rack-mount form factor uses less rack space and provides a lower per-port cost.
Hardware Features Complies with IEEE802.3u 10BASE-T, 802.3u 100BASE-TX/FX, 802.3ab 1000BASE-T, 802.3z Gigabit fiber RJ-45 Port support auto MDI/MDI-X function 24 ports 10/100/1000TX, and 4 SFP ports Stack management via one IP address, easy management by Web GUI Supports a wide variety of SFP modules Store and forward switch architecture Supports 48VDC power design Software Features Web/ SNMP / Telnet / CLI management IGMP support for Multi Media application Port mirror / Port security Port Based VLAN /802 .1Q VLAN DHCP Client All Ethernet Direct products provide high value, flexible design and reduced maintenance requirements due to superb quality.
The new JMG-24F4 stackable management switch solution reduces Total Cost of Ownership and is an ideal choice for delivering highly reliable transmission in network infrastructures.
• Ethernet Direct: contact details and other news
• Email this article to a colleague
• Register for the free Buildingtalk email newsletter
• Buildingtalk Home Page
Search the Pro-Talk network of sites
