Product category:
Heating Systems, Controls and Management
News Release from: Fabdec | Subject: Unvented water heaters
Edited by the Buildingtalk Editorial
Team on 29 August 2005
Fabdec launch new unvented water heaters
A brand new unvented water heater is being launched into the market by the original pioneer of the duplex stainless steel Unvented system in the UK.
A brand new unvented water heater is being launched into the market by the original pioneer of the duplex stainless steel Unvented system in the UK Fabdec has been working in the commercial water heating market for a number of years, but is celebrating its return to the domestic market with the launch of the Excelsior, a trailblazing energy efficient water heating system available in two superior finishes; either plastosol or stainless steel
This article was originally published on Buildingtalk on 11 Apr 2006 at 8.00am (UK)
Related stories
Cylinder success drives business expansion
Fabdec will develop a new storage and manufacturing area near their main manufacturing site to keep up with demand for their new Excelsior and Excelsior S cylinders.
Costcutter energy efficiency savings with Fabdec
Fabdec , has supplied its revolutionary Smart-heat heat recovery system to the Costcutter supermarket in Ballymena, Northern Ireland.
The use of a duplex inner steel cylinder and an outer steel casing results in a light, strong and safe solution that delivers high performance and reliability at an affordable price.
Due to the high qualities of the stainless steel, the Excelsior unit requires little maintenance.
Available in two models, the Excelsior and Excelsior S, which has a metal finish resulting in an attractive contemporary design that will look good in any situation, it is available in cylinder sizes ranging from 80 litres to 305 litres.
The mains-fed heaters deliver constant water pressure to a maximum of 3 bar - regardless of other appliances in use meaning baths are quickly filled and showers benefit from a powerful flow rate.
Because hot and cold water comes direct from the mains, the Excelsior can be sited in any location on any floor of a building subject to available pipe work.
The Excelsior is highly energy efficient.
Due to its dropped coil design, water is quickly brought to temperature.
Heat loss is also kept to a minimum by using 45mm CFC free foam insulation resulting in maximum economy and additional cost savings for the householder.
Installation is straightforward and quick to carry out.
This is helped by the use of cost effective, labour-saving, push-fit connections.
Fabdec's Excelsior is a British innovation manufactured from quality components.
Its lightweight design that allows flexible positioning, low maintenance and simplifies plumbing requirements.
These factors and its competitive price will make it an attractive option for both installers and specifiers and a welcome addition to any home.
For further product information, please call 01691 627210 or email excelsior.sales@fabdec.com.
• Fabdec: contact details and other news
• Email this article to a colleague
• Register for the free Buildingtalk email newsletter
• Buildingtalk Home Page
Search the Pro-Talk network of sites
