Visit the Comtec Enterprises web site
Click on the advert above to visit the company web site

Product category: Thermal Imaging and Aerial Surveys
News Release from: Flir Systems | Subject: ThermaCAM B-Series infrared cameras
Edited by the Buildingtalk Editorial Team on 28 July 2005

Clearer images with new B20HSV from Flir

FLIR Systems building-specific ThermaCAM B-Series infrared cameras mean inspectors can now see problems even more clearly.

The thermal sensitivity of FLIR Systems building-specific ThermaCAM B-Series infrared cameras is already an impressive 80mK but with the introduction of two new 50mK resolution models to the range, inspectors can now see problems even more clearly These new uncooled models, the ThermaCAM B20HS and B20HSV, allow highly sensitive thermal mapping of structures and architectural features enabling detailed diagnosis of problems

They provide immediate, high-resolution documentation of as-built or post-restoration quality, plumbing and building envelope water leakage, water-damaged material assessment, energy efficiency, roofing and even rodent or pest discovery.

The only feature to differentiate the two models is an integral visual camera with the ThermaCAM B20HSV.

Their superb performance is akin to that of a cooled camera but unlike most uncooled competitors they achieve this quality without frame averaging.

This allows the ThermaCAM B20HS(V) to reveal easily wet conditions behind surfaces such as enamelled walls and wallpaper that don't readily stain.

It is also ideal for tracking leaks to source, monitoring drying processes and for confirming when a structure is dry.

In common with other ThermaCAM models in the building-specific B Series, these HS versions have the automatic dew point identification alarm that is unique to FLIR Systems.

The dew point is calculated in real time as a function of air temperature and relative humidity and indicates potential surfaces in the room where condensation is likely to occur.

Weighing just 2kg, the ultra-portable ThermaCAM B20 HS(V) fits comfortably in the hand.

It comes complete with plug-in remote control assembly that includes a 4" colour LCD monitor.

The remote control can be attached to the camera body or used to operate the camera via the coil-cord connector in hard-to-reach areas.

The exclusive FLIR Systems Laser LocatIR target designator is also a standard feature.

User-friendly interfaces including joystick, intuitive menus, and three direct access buttons allow easy one-handed operation.

For increased flexibility, control camera functions are via four direct access buttons located on the side of the camera.

Lightweight, long-life, rechargeable Li-Ion batteries ensure uninterrupted in-field inspections.

JPEG images with full 14-bit thermal accuracy and all other relevant measurement data are downloaded directly to a PC from the removable CompactFlash cards via ThermaCAM Connect and standard USB or serial cables.

Findings are easily documented by inserting the JPEGs into any word processing package.

In addition, standard composite video and S-video outputs provide high definition, real-time imaging. Request a free brochure from Flir Systems ...

Flir Systems: contact details and other news
Email this article to a colleague
Register for the free Buildingtalk email newsletter
Buildingtalk Home Page

Search the Pro-Talk network of sites

Visit the Comtec Enterprises web site