Product category:
Floors
News Release from: Gradus Group | Subject: Stair Edgings
Edited by the Buildingtalk Editorial
Team on 25 October 2004
Gradus Stair Edgings Follow ADM
Guidelines
Gradus has launched a range of new stair edgings to meet the guidelines published in the Building Regulations Approved Document M (ADM).
Gradus has launched a range of new stair edgings to meet the guidelines published in the Building Regulations Approved Document M (ADM), which comes into force this October and will help to create inclusive environments in line with DDA requirements The new stair edgings are available from immediate effect and are the Gradus DDA, RNC and ADM ranges
This article was originally published on Buildingtalk on 25 Jul 2005 at 8.00am (UK)
Related stories
Gradus new range of LED lighting solutions
Gradus Lighting has developed a new range of LED lighting solutions, in the form of stair edgings, aisle and floor trims and Eyeleds.
Gradus is a perfect fit for Exeter court
Extensive range of barrier matting, carpet and stair edgings from Gradus have been fitted throughout Exeter's new-look Crown and County Court,
The Gradus DDA PVC-u Hardnose profiles are the perfect solution for specifiers and contractors looking for stair edgings that offer suitable colour contrast or additional slip resistance.
55mm in dimension on both the tread and the riser, Gradus DDA profiles are available in a range of colours and have been designed with a unique front edge to offer superior slip resistance.
This is particularly relevant for stairs with a narrow going/tread, where additional grip is required on the leading edge of the step.
Further reading
Gradus helps improve Plymouth Theatre
Gradus stair edgings have been installed at the Theatre Royal, Plymouth, as part of a 2.5 million pound refurbishment project.
Gradus interiors give church the finishing touch
Range of carpets and stair edgings from Gradus has been specified for the new-look Harrow International Christian Centre (HICC) in Middlesex.
Four profiles are available in square and rake back designs to suit different types of floorcovering.
The RNC PVC-u stair edgings also incorporate the unique slip-resistant front edge feature but are designed with a 40mm riser to comply with recommendations by the JMU, one of the leading access consultative bodies.
JMU's best practice states that stair edgings should be 55mm on the tread and 30-50mm on the riser to allow flexibility with the height of the step.
The RNC profiles also come in a range of colours in order to offer a suitable colour contrast with the floorcovering.
The final addition is the ADM range of aluminium profiles.
Designed for specifiers who are looking for a more traditional finish, the ADM stair edgings are once again 55mm on both the tread and riser to comply with ADM guidelines.
Available in both square and rake back designs these profiles are suitable for use with both carpet and resilient floorcoverings.
Following the publication of the revised ADM guidelines, the government (Office of the Deputy Prime Minister) acknowledged that there may well be alternative ways of achieving compliance with the DDA requirements and that there is no obligation to adopt any particular solution contained in the ADM, if specifiers prefer to meet the relevant requirements in some other way.
The launch of the new Gradus stair edgings provides specifiers with the ultimate choice when selecting the most suitable stair edging for individual applications, taking into consideration building standards, safety, performance and aesthetics.
With over 35 years experience in the manufacture of stair edgings, Gradus offers the widest range of stair edgings available and can offer solutions for most applications.
• Gradus Group: contact details and other news
• Email this article to a colleague
• Register for the free Buildingtalk email newsletter
• Buildingtalk Home Page
Search the Pro-Talk network of sites
