New interfaces for vehicle wire protection

New range of nylon external straight and 90 interface for ampseal for critical wiring protection is now available from Harnessflex

Harnessflex are the leading designer and manufacturer of flexible conduit systems and connector interfaces for critical vehicle electrical wiring protection.

These products provide complete wiring protection right up to the connector so there are no exposed wires.

By specifying these IP40 interfaces to protect harnesses, vehicle wiring will also be protected from the effects of high pressure washing and therefore monitoring the high integrity of connectors.

The interface also offer strain relief to connectors.

The 90 interface is designed to allow conduit to switch through 360 around the connector housing.

This avoids problems caused by over flexing due to vibration that are associated with one piece interfaces.

Straight fittings are available to suit conduit size from 8-20mm diameter with 2-12 way connectors.

Elbow fittings suit 12mm conduit.

They all snap together over slit and unslit conduit and offer a nominal 120N pull off strength.

Operating temperature in static operations is -40 to 120c and -5 to 150 in dynamic applications.

Back to top