Product category:
Pumps and Compressors
News Release from: Hidrostal | Subject: Prerostal [self-cleaning sump] system
Edited by the Buildingtalk Editorial
Team on 13 July 2006
Hidrostal pumps role in Thames Water
project
Hidrostal and their pumps have played a significant role in the improvements made to the inlet works at the Sewage Treatment works [STW] in Esher, Surrey.
Hidrostal and their pumps have played a significant role in the improvements made to the inlet works at the Sewage Treatment works [STW] situated in and serving Esher, Surrey The Thames Water project to replace the existing pumps and pipework has been a joint venture between Black and Veatch and Costain who have overall responsibility
This article was originally published on Buildingtalk on 15 Aug 2003 at 8.00am (UK)
Related stories
New Pumping Stations At The Castlepoint Centre
HIDROSTAL Limited, the Newbury based manufacturer and supplier of pumping solutions, has successfully completed the M and E installation of two foul pumping stations at the Castlepoint Centre, Dorset.
Hidrosal Contract Award Terminal 5
Hidrostal awarded contract to supply pumps to Heathrow Terminal 5
Hidrostal were awarded the contract to supply replacement pumps and fifteen Hidrostal pumps were also used during the over-pumping project.
The refurbishment started with a major over pumping project to keep the sewage flowing to the STW; both the Esher and Hersham pumping stations had to be by-passed ensuring no adverse affect on the residents.
This massive over-pumping project was delivered, installed and commissioned in less than three weeks.
Further reading
Betsy Is Even Quieter!!
With noise emissions now reduced to 55 dB at 7 metres distance, the new redesigned Hidrostal 100 mm self-priming, diesel engine pump set, affectionately known as Betsy, is keeping nobody awake!
Environment impact key selection criteria
Exsel Pumps provide optimum performance, demonstrate respect for the environment - energy consumption and noise emissions - and create a new niche market.
It involved the installation of 10 Hidrostal pumps at the Esher pumping station [maximum flows of 900 l/s], 5 Hidrostal submersible pumps at the Hersham pumping station [maximum flow 410 l/s] and over 370m of pipe was installed [70m at 700mm dia.
and 300m at 500mm dia].
The whole installation was controlled by a telemetry system allowing for remote monitoring.
Once the over- pumping solution was in place the two new Hidrostal pumps could be installed.
As the old pumps suffered from blockages, Hidrostal immersible pumps incorporating the Hidrostal Prerostal [self-cleaning sump] system were selected.
Each pump operates at 990 rpm and will pump at approximately 480 l/sec.
The screw centrifugal impellers offer high pump efficiency and, due to the impeller geometry and the large free passage, have a very low risk of blocking.
The Prerostalsystem is unique to Hidrostal.
It has been specifically designed to prevent the build up of solid material floating on the surface and forming a floating raft in the pumping chamber which is often the cause for pumps to block.
It is especially effective on wet wells handling unscreened raw sewage and waste water with oils, fats and greases on the surface.
The Prerostal system comes into operation at low sump levels when a high degree of liquid rotation occurs; the specific geometry of the basin and bellmouth ensures all floating material is entrained by the liquid and pumped out of the wet well.
The system automatically directs all materials which tend to settle or float at every pump cycle to the screw centrifugal pump with its proven track record for solids handling and, as a consequence, provides trouble-free pumping.
Commenting on the total project Dean Clayton, Hidrostal's Area Sales Engineer said: ''This has been an impressive project and a credit to all involved.
The superior rag handling ability of Hidrostal pumps combined with our Prerostal self cleaning sump, has played a key part in ensuring a much improved pumping operation.''.
• Hidrostal: contact details and other news
• Email this article to a colleague
• Register for the free Buildingtalk email newsletter
• Buildingtalk Home Page

