Product category:
Builders Merchants
News Release from: Schaeffler (UK) | Subject: INA ELGES spherical plain bearings
Edited by the Buildingtalk Editorial
Team on 18 August 2004
INA FAG Helps To Keep The London Eye
Moving
INA ELGES spherical plain bearings in the base of the wheelbearings help to compensate for wind induced micro movements that would otherwise have an adverse effect The London Eye.
The British Airways London Eye is one of the most spectacular and popular attractions in the world Since its opening in 2000 it has completed more than 30,000 rotations at 0.26 metres per second, and has welcomed more than 20 million visitors on board for the half-hour ride
This article was originally published on Buildingtalk on 23 Oct 2007 at 8.00am (UK)
Related stories
Unforeseen plant and machinery breakdowns
Latest condition monitoring systems and services reduce unforeseen breakdowns to production plant and machinery, says Schaeffler (UK) .
Risk from UK 'grey' market for bearings
UK 'grey' market for bearings puts end users and distributors at risk says Schaeffler.
The 32 capsules can carry up to 15,000 visitors per day.
An exceptional piece of modern engineering, the London Eye is still moving safely thanks to a number of specially made components.
The two main spindle bearings installed in the hub of the Millennium Wheel are large-sized FAG double row radial spherical roller bearings with pin-type cages.
Further reading
Schaeffler X-life axial spherical roller bearings
New X-life axial spherical roller bearings offer more than double the life even in harsh operating environments, including construction machinery, rolling mills and lifting gear.
Bearing solutions cut costs, power and weight
Schaeffler's range of bearings offers construction equipment manufacturers corrosion-resistant, maintenance-free, efficient, high performance solutions.
Split spherical roller bearings cut costs
FAG range of split spherical roller bearings from Schaeffler UK helps heavy industries such as mining and quarrying companies cut costs
They are located on the wheel axis as a locating/ floating bearing arrangement and have to withstand the load of the 135 metres high wheel and 1,700 tonnes of steel.
The spindle and hub alone weigh over 330 tonnes.
The locating bearing has an outside diameter of 2.66 metres, weighs 6.3 tonnes and is firmly mounted on the shaft in axial direction.
The floating bearing has an outside diameter of 2.62 metres, weighs 5.2 tonnes and can move on the shaft in order to compensate for longitudinal expansion.
As these are considered safety-relevant components, the bearings have to undergo regular inspections.
During the second of these inspections, which took place in early 2004, the bearings were found to be as good as new.
The lubricant was free of any contamination and wear particles and no abrasion or wear could be detected.
As lubricant was found in the roller bore, future wear of the pins can almost certainly be ruled out.
This is good news for the Schaeffler Group which has also supplied two large-sized INA ELGES spherical plain bearings in the base of the wheel.
These were originally required for slewing the wheel from its horizontal mounting position over the Thames into its vertical operating position.
The bearings now help to compensate for wind induced micro movements that would otherwise have an adverse effect on the not very flexible steel construction.
The bearings in the base of the wheel have an outside diameter of 6 metres and weigh 194 kilogrammes each.
The outer ring is firmly fixed to the housing, whereas the inner ring can move on the shaft.
This makes it possible to compensate for heat expansion.
The spherical plain ELGES bearings are coated with ELGOGLIDE, a low-friction, maintenance-free material.
This is a PTFE, commonly known as Teflon, and fabric composite that has been developed by INA FAG to meet the demanding long-term, maintenance-free requirements of the architectural and construction industry.
The special coating increases the life span of the bearings considerably even at the high load of 362N/mm2.
During the slewing procedure the bearings even had to take a load of more than 450N/mm2, which they withstood without problems.
Life span of the bearings has further been increased by sealing them on both sides to eliminate contamination.
Without these bearings, the design of the wheel would have to have been changed into something much less elegant than the London Eye as we know it today.
The popularity of the London Eye has sparked ideas for similar projects around the world.
Planning has already started for the construction of giant ferris wheels in Singapore, Melbourne, Beijing, Shanghai, Hong Kong, Dubai and Berlin. Request a free brochure from Schaeffler (UK) ...
• Schaeffler (UK): contact details and other news
• Email this article to a colleague
• Register for the free Buildingtalk email newsletter
• Buildingtalk Home Page
Search the Pro-Talk network of sites
