Product category:
Electrical Services
News Release from: IDEC Electronics | Subject: SmartRelay FL1D Series
Edited by the Buildingtalk Editorial
Team on 07 March 2006
IDEC introduce the SmartRelay FL1D
series
IDEC have introduced the SmartRelay FL1D series which introduces extra capabilities at the same low cost as earlier SmartRelay series.
IDEC have introduced the SmartRelay FL1D series which introduces extra capabilities at the same low cost as earlier SmartRelay series Background and concept
This article was originally published on Buildingtalk on 7 May 2007 at 8.00am (UK)
Related stories
WindO/I-NV2 compatibility with Windows Vista
IDEC Electronics latest version of WindO/I version 3.30 HMI programming software incorporates a number of new features.
Flush silhouette control units from IDEC
IDEC Electronics are now producing a range of control units that present a flush silhouette appearance to the front of a control panel.
The SmartRelay series was introduced approximately 2/3 years ago offering a range of programmable relays with or without a front display.
Many different functions can be programmed including timing, counting, calendar/clock operations, text displays etc Different supply options, the ability to set up analogue inputs and volt free contacts rated at 10A means the SmartRelay had the flexibility to meet any control situation requiring sequencing/ timed/counting operations.
With the introduction of an analogue output expander block, the FL1D can perform closed loop control (PI - proportional and integral), for example an industrial food fryer which would require close maintaining of a set temperature.
Another new function like the Analogue Ramp would provide varying speed levels for motors/ conveyers.
When you consider the FL1D can pack up to 130 of these functions in its memory and can add up to 7 expansion I/O blocks, it can be seen what a powerful device this SmartRelay is.
Smart by name and Smart by nature!.
When using the programming software your control circuit can be simulated and tested before downloading into the FL1D, so providing easy checking of your intended application.
Options.
12, 24VDC, 24VAC or 100 to 240V AC or DC supply options, 0 to 10V analogue inputs and outputs, 1 KHz high speed counters and relay or transistor outputs.
• IDEC Electronics: contact details and other news
• Email this article to a colleague
• Register for the free Buildingtalk email newsletter
• Buildingtalk Home Page
Search the Pro-Talk network of sites
