Product category:
Electrical Services
News Release from: Igus UK | Subject: DryLin TK-04
Edited by the Buildingtalk Editorial
Team on 14 October 2003
DryLin TK-04 Miniature Linear Bearing
When a small, lightweight, quiet running, high-speed linear bearing system is required the new TK-04 range from igus offers the complete solution.
This is not, however, just a case of things getting smaller All of the advantages offered by a miniature linear ball bearing system remain, with additional advantages to be considered
This article was originally published on Buildingtalk on 21 Jul 2008 at 8.00am (UK)
Related stories
Transmission of energy and data for cranes
Igus on secure energy and data transmission for indoor and outdoor crane equipment and conveyor systems.
Igus offers lubricant-free 'Iglidur' bearings
Tribo-optimised 'Iglidur' plastic plain bearings from Igus require neither oil nor grease; they are lubricant-free, so that no contaminants escape into the environment
"The smaller the linear bearing, the lower the cost".
This alone should hold serious considerations for customers, especially in times of tight budget constraints.
The basic components (hard anodised aluminium rails, iglidur J polymer sliding strips and cast carriages) are maintenance free, dirt repelling and chemically resistant.
The replaceable polymer sliding elements achieve excellent friction and wear values, without lubrication.
An important consideration in applications such as packaging machinery, laboratory equipment and the electro-mechanical industry, is low noise.
DryLin TK-04 linear bearings have no moving parts and run significantly quieter than comparable ball bearing systems.
The need for extremely high accelerations and travel speeds, both of which are achievable using the DryLin T system, is also of particular interest to these industries.
It is not only the chemical industry that can benefit from the chemical resistance and corrosion free properties of this linear system, and the fact that there is no need for lubrication means that DryLin TK-04 systems run maintenance free, eliminating any problems associated with dirt and dust being retained by lubricants.
The DryLin TK-04 linear system is offered in three sizes: TK-04-09, TK-04-12 and TK-04-15.
Due to the continuous, extensive testing of all linear products in the igus laboratories, the lifetime expectancy of the system can be calculated for all applications.
All TK-04 products are available, ex-stock, from igus (UK) Limited in Northampton. Request a free brochure from Igus UK ...
• Igus UK: contact details and other news
• Email this article to a colleague
• Register for the free Buildingtalk email newsletter
• Buildingtalk Home Page
Search the Pro-Talk network of sites
