Kee Safety on safer working on roofs

Kee Safety has introduced the Kee Roofpoint range to make maintenance work on roofs safer, quicker and more cost-effective.

Kee Roofpoint range of Class A1, A2 and supports for Class C roof anchor points.

The Kee Roofpoint range comprises the Roofanka, Ridganka and Postanka product solutions which are ideally suited for new or retrofit installation.

Independently tested by the NEL (National Engineering Laboratory), conforming to EN 795, BS 7883 and ISO 14567 and CE approved to PPE (Personal Protective Equipment) Directive, these fixed anchor points eliminate the need for contractors, housing associations, local authorities, facility managers and other building owners to erect scaffolding.

They provide a ready to use, fixed anchor point for the secure attachment of a variety of different fall arrest devices in full compliance with the requirements of the Work at Height Regulations 2005.

Roofanka is a versatile, slope mounted fall arrest anchor, suitable for installation on most types of roof support and easily adjusted to limit the number of components.

It combines a fall arrest anchor, ladder hook and crawling board clamp in the one product, allowing contractors to attach industrial safety lanyards, belts and harnesses and to secure roof ladders, crawling boards, work platforms, etc.

Roofanka is specially designed to be mounted on the slope of the roof, which enables the anchor to be fixed next to the access point.

An alternative version enables horizontal, flexible safety lines to be fitted.

Ridganka is a fall arrest anchor for installation on the ridge of a pitched roof.

This ensures the safest anchorage position above the position of the contractor whilst providing access to both sides of the roof from the one anchor point.

It is adjustable to fit a wide range of roof trusses and supplied in two different sizes.

Postanka Anchor Pedestals are for use as supports with horizontal flexible safety lines, single point attachment for fall protection use or rope access work.

Designed to withstand twice the force that would be subjected at fall arrest, Postanka is available in traditional steel and plate, height adjustable and 'weldless' versions, it can be bolted directly to concrete roofs or attached to steel elements of the main structure using Kee Safety Beamclamp fixings.

Alternatively, it can be clamped to the side of beams, joists or channels.

The Kee Roofpoint range provides an effective solution for a variety of access problems and adds to the growing selection of safety products that Kee Safety provides.

As a leading supplier of fall protection solutions, Kee Safety also provides a range of collective and personal protection products including KeeGuard, Kee Dome, Kee Anchor and Kee i-bolt.

The technical team can offer practical assistance in all aspects of design, installation and compliance with relevant standards for each product.

Back to top