Product category:
Lighting Services
News Release from: Look4ideas.com (ME Solutions) | Subject: MR16 Halogen Replacement LED Lighting
Edited by the Buildingtalk Editorial
Team on 10 February 2004
MR16 LED Lamps - Replace MR16 Halogen
Lamps
LED MR16 lamps offer whiter 'cleaner' light, use up to 50 times less energy, last up to 20 times longer, and operate much cooler. They are safe for low level lighting and close to fabrics.
Super bright Luxeon and Optical Light Engine LED lamps in aluminum housings, fused with built in heat sinks Fit standard 2 pin MR16 GU5.3 base
This article was originally published on Buildingtalk on 26 May 2003 at 8.00am (UK)
Related stories
New HVAC Automation Provides Seamless Connectivity
ABB's drives for the HVAC sector are now supported by software drivers for the Compass protocol conversion system, from North Communications.
mCERTs Approval For ABB Continuous Gas Analysers
The range of Continuous Gas Analysers and systems manufactured and marketed by ABB Limited has recently been certified to the latest mCERTs standards.
These LED MR16 lamps offer whiter 'cleaner' light, use up to 50 times less energy, last up to 20 times longer, and operate much cooler.
They are safe for low level lighting and close to fabrics.
Luxeon MR16 uses one Luxeon star with special made colaminator lens to fit the MR16 cup producing a 20Degs beam angle.
They operate on 6-12V AC/DC.
The Optical Light Engine (OLE) brings a higher level of performance for LED lighting.
It generates typ.
100lux, in 4.2 watts of power and provides huge advantages over both conventional bulbs and other solid-state lighting Traditionally, LED light sources have been constructed using a series or matrix of stem-type or C SMD type LEDs.
The OLE provides a totally new packaging lighting C technology.
It uses a COB packaging of semiconductor chip mounted on a modulated C PCB and a heat sink, which provides much better thermal properties as compared to typical LEDs configuration.
The OLE is allowed to operate at much higher C operating currents than the current LEDs in the market.
The OLE can be driven at 350mA.
The LED colour is defined by the wavelength of semiconductor chip.
The OLE is applied in a MR16 cup with standard GU5.3 base and 12V AC/DC operation with a 30Deg beam.
Plans are on the way for production of a standard MR16 GU5.3 utilizing one Luxeon III.
Production is estimated to start beginning of March with immediate availability.
• Look4ideas.com (ME Solutions): contact details and other news
• Email this article to a colleague
• Register for the free Buildingtalk email newsletter
• Buildingtalk Home Page
Search the Pro-Talk network of sites
