Product category:
Power Tools
News Release from: Masterwood (UK) | Subject: Project 415 panel CNC machining centre
Edited by the Buildingtalk Editorial
Team on 28 May 2007
Overcoming production slowdowns at
Roundel
Major production bottleneck has been removed at fitted furniture maker, Roundel, with the introduction of a Masterwood Project 415 panel CNC machining centre.
Roundel design, manufacture and install bespoke kitchens, bedrooms and bathroom furniture for major house builders and the domestic market Substantial investment in modern technology and manufacturing techniques has firmly established the company as a major force within the industry
This article was originally published on Buildingtalk on 21 Dec 2005 at 8.00am (UK)
Related stories
Fallowfield expands on all fronts with Masterwood
Lake District joinery, Fallowfield Projects, has increased turnover and profitability and opened up new business opportunities after buying two Masterwood CNC machining centres.
Moorland Windows buys new Masterwood Project 415
Moorland Windows is one of the first UK joinery manufacturers to buy the new Masterwood Project 415 CNC machining centre.
With six factories in the North East and 150 employees, its Seaton Burn plant specialises in kitchens and bedrooms, with some study and office furniture production.
The problem was its 10-year-old point-to-point CNC machining centre was not able to drill panels fast enough to keep up with increasing production requirements.
This slowed down the flow of components through the factory, playing havoc with production schedules.
Further reading
Woodworking software mastery from Masterwood
Masterwood is rare amongst CNC machining centre manufactures in developing its own software for wood processing called Master Cabinet software.
Newbridge joinery buy new Masterwood all-rounder
Architectural Woodwork and Design, of Newbridge, Co Kildare, has become the first Irish woodworking company to buy the new Masterwood Project 523 CNC machining centre.
Masterwood Windowmaker system does it all
Windowmaker is an integrated system of machining centre and software for the design and production of wooden windows.
Also, as it did not have a router, additional processes requiring traditional machines were needed.
All this has been overcome with the arrival of the Project 415.
It has a 3.2m long working bed and is equipped with a 14kw vertical router, a 10 position tool carousel and a multi-spindle drilling block.
Its purchase was part of an ongoing investment programme at the Seaton Burn plant which has also seen the recent commissioning of a Schelling beam saw and a Brandt edgebander at a total cost of around GBP200,000 Roundel has four other CNC machining centres throughout its factories and the Project is its first Masterwood.
Group factory manager Roy Ramshaw said there were several reasons for buying it.
"The main one was the attractiveness of the software, especially the multi-positioning program".
"It's so easy to use and if I can understand it anyone can".
"I also liked the machine's build and the favourable comments I got from other furniture makers when I checked it out".
"It's a good value-for-money machine".
The panels used for kitchen and bedroom furniture are mainly 14mm and 16mm thick MDF and MFC plus 22mm thick solid Oak and Maple.
Said production supervisor Dave Potts: "We use the Masterwood for all the routing, drilling and grooving of the panels".
"As well as being quicker it's much more accurate than our old CNC and has enabled us to overcome the bottlenecks we were experiencing and the downtime this resulted in.
"Because it has a boring and routing facility, as well as a handy grooving saw, we have been able to get rid of two traditional machines, a spindle moulder used for profile moulding and a pin router.
Roundel is benefiting from the remarkable versatility of the Masterwood, which can also do shaped work, and most of the panel processing is now channelled through it".
"We are finding new things for it to do almost every day," said Dave Potts.
"It can do accurate shaped work on panels, and we recently made a 10mm thick chipboard curved template with it which we use to produce curved glass tops for breakfast bars".
"We can also process all the components on it for scalloped wooden wine racks, which we had to buy in before." The machine's Masterwork operating software is linked to Masterwood's multi-positioning software program.
This delivers full panel optimisation, with four panels placed on the machine's bed at a time.
The programs are produced on a PC in the office, put on a USB stick and downloaded into the machine, all ready for the operator.
Said production manager Garry Nicholson: "The Masterwood's software is easy to pick up and the speed and accuracy of the machine has made us much more efficient, with production hold-ups now a thing of the past.".
• Masterwood (UK): contact details and other news
• Email this article to a colleague
• Register for the free Buildingtalk email newsletter
• Buildingtalk Home Page
Search the Pro-Talk network of sites
