Product category:
Electrical Services
News Release from: Mitsubishi Electric Automation Systems | Subject: Barwits Control System
Edited by the Buildingtalk Editorial
Team on 07 June 2007
Reducing aggregate turnaround times for
Olympics
Remote diagnostics developed by Barwits Control Systems for United Marine Dredging (UMD) are helping are helping with this Olympian effort.
Building projects for the London Olympics are driving demand for aggregates through the roof, so dredger captains need to discharge their cargos efficiently so that they can get back out to sea without missing a tide Remote diagnostics developed by Barwits Control Systems for United Marine Dredging (UMD) are helping are helping with this Olympian effort
This article was originally published on Buildingtalk on 23 Jun 2008 at 8.00am (UK)
Related stories
Welcome for air source recognition
House of Lords agrees to support the expansion of the statutory definition of 'microgeneration' to include air source heat pumps.
Carbon reductions from combined heat and power
Combined Heat and Power (CHP) is high efficiency technology strongly backed by the UK Government, who have set a target of 10,000 MW of installed CHP capacity by 2010.
Unloading sand and gravel collected offshore for building materials is demanding work that usually has to be completed to a tight timetable so that ship can get out to sea again and maintain operations.
So if any part of the complex scraper discharge system fails, a rapid repair is vital.
While Tunbridge Wells in the heart of Kent may not be so well known for its maritime heritage, it is the home of Barwit Control Systems, which over the years has built up a reputation for being the foremost provider of dredger discharge control systems.
Further reading
Jet Towel wins hands down
Radical new hand dryer that has revolutionised washroom hygiene throughout Japan and Asia is now available in Europe, through inventors Mitsubishi Electric.
Thames barrier staff protect London in comfort
Staff at Thames Barrier are enjoying a fully controllable indoor working environment thanks to the installation of a new City Multi heat recovery air conditioning system by MacWhirter .
Intelligent automation platform from Mitsubishi
Mitsubishi has addressed today's business needs for more flexible, efficient and integrated processes with the introduction of the iQ Platform.
Mechanically the system consists of two 12 cubic metre, 20 tonnes scraper buckets, which are lowered into the cargo hold and scraped across the load and then winched over a conveyor and up-ended.
The synchronisation and motion profile of the buckets is both complicated to set up and critical to the success of the unloading operation, and they must be maintained throughout the entire 5000-6000 tonnes unloading operation.
"We've just completed our fifth vessel," says Colin Jeffreys, a Barwit's control systems designer.
"Each one is bespoke to the project, and each is a development from the previous system.
Over the years we have particularly come to rely on Mitsubishi Electric control hardware, which is robust and reliable even in this most arduous of sea-going applications, and which is backed by excellent service".
The whole control system, which extends throughout the full length of the ship is based on a single Mitsubishi Q series PLC (programmable logic controller).
The Q series is Mitsubishi's flagship industrial controller, and the fact that Barwit does not feel obliged to have a second unit in hot standby is testament to its reliability.
The Q is designed to offer a high level redundancy for system-critical applications and uses dual CPUs, power supplies and bases.
It combines 'out of the box' system building using standard components with customisation by simple parameter setting.
It has a level of simplicity normally expected of smaller PLCs and is configured for total data tracking and extensive physical redundancy so that ultra high system availability can be guaranteed.
Configured with the Q on the dredger system over a remote i/o network are three Mitsubishi E1151 HMIs (human machine interfaces) and a GPRS remote communications unit.
"The system can be interrogated from on board the ship via any of the HMIs," explains Jeffreys.
"The GRPS takes this capability a big step further by allowing specialist to 'dial in' from anywhere in the world.
This menas that if there is the slightest glitch during unloading, the crew can instantly contact us or Mitsubishi for expert advise.
We reckon that the first such phone call will pay for the GPRS several times over, such is the loss of earnings if a ship is stranded overtide." The system also includes several Mitsubishi variable speed drives.
One of their critical functions is to optimise the speed of the conveyor depending on the material, sand, gravel, pebbles, etc, being unloaded.
The winch motors controlling the scraper buckets are DC controlled, and their speed is also defined by the materials being handled "The shipboard communications is based on Profibus (although the HMIs are connected by a dedicated Ethernet cable), which is immune to the high levels of electrical noise to be expected on maritime systems.
Originally we used fibre optics, but this was too slow to replace in the event of a breakdown.
"On jobs like this, reliability and back-up are critical and we are delighted with the relationship we have formed with Barwit and Mitsubishi." Says Mark Williams. Request a free brochure from Mitsubishi Electric Automation Systems ...
• Mitsubishi Electric Automation Systems: contact details and other news
• Email this article to a colleague
• Register for the free Buildingtalk email newsletter
• Buildingtalk Home Page
Search the Pro-Talk network of sites
