Product category:
Utilities - Gas, Electric, Water, Telephone
News Release from: Murex Welding Products | Subject: Saffire NM Cutter range
Edited by the Buildingtalk Editorial
Team on 02 April 2007
NM Cutters build on proven Saffire
reliability
Murex Welding Products' latest Saffire NM Cutter range meets demands of hand cutting market.
Murex Welding Products' latest Saffire NM Cutter range incorporates all the latest technological features necessary to meet the demands of the hand cutting market Each cutter incorporates a nozzle mix principle designed for maximum safety as well as a backfire resistant design
This article was originally published on Buildingtalk on 23 May 2008 at 8.00am (UK)
Related stories
New Tradesmig 141 welding machine
For simple welding tasks that demand high quality, the new Murex Tradesmig 141 is the ideal solution.
Tough Murex industrial compact welding machines
Murex Transmig 300C and 350C for heavy duty and medium MIG or MAG welding applications.
A unique cutting oxygen flow valve acts indirectly to bring in the oxygen stream.
This important feature gives a true "bleed" characteristic to create splash free starts and progressive piercing and the smoothest possible cutting conditions.
Two NM Cutters are available to provide cutting capacities of 250mm and 400mm with 90 and 75 cutting heads.
The NM 250 model, for both acetylene and propane service, is primarily designed for general workshop cutting.
Its balance and trim make it ideally suited to most industrial applications.
It features a new control knob for positive flame setting and a robust lever latch.
The NM 400 benefits from a 75deg head combined with a cutting capacity of 400mm.
The cutter is designed for heavy duty fabrication and scrap cutting applications.
Here, the combination of head angle and extended length create both positive and comfortable working conditions for the operator.
The range of Saffire NM cutters continues the tradition of nozzle mix design with the safety, quality and reliability synonymous with the Saffire brand.
A proven design incorporating the latest technical features necessary to meet the changing service requirements of the hand cutting market.
Saffire NM cutters are designed to EN5172 "Handheld Blowpipes for Welding and Cutting" and manufactured in the UK under the quality management systems of BS EN ISO 9002. Request a free brochure from Murex Welding Products ...
• Murex Welding Products: contact details and other news
• Email this article to a colleague
• Register for the free Buildingtalk email newsletter
• Buildingtalk Home Page
Search the Pro-Talk network of sites
