Visit the Brett Martin Daylight Systems web site
Click on the advert above to visit the company web site

Product category: Drainage Services
News Release from: Polytech Systems | Subject: Poly GRC for industrial drainage
Edited by the Buildingtalk Editorial Team on 27 March 2008

Polytech launches Poly GRC for
industrial drainage

Request your FREE weekly copy of the Buildingtalk email newsletter. News about Drainage Services and more every issue. Click here for details.

Surface drainage specialist, Polytech, has launched Poly GRC, a new glass reinforced concrete channel system that offers a robust alternative to traditional polymer concrete.

Poly GRC is ideal for heavily loaded industrial drainage applications, where channel installation is often a phased process Its superior strength offers greater resistance to breakages than can be achieved with a standard polymer concrete product, and also gives the installer an increased degree of tolerance, as the units are able to withstand higher levels of impact

The boltless locking system of Poly GRC makes it efficient to install and maintain, as the channel grating is easily secured or released using a simple lever key.

Designed to maximise flow while minimising system size, Poly GRC is an effective and economical channel drainage solution.

Available in gradient, stepped or fall units, Poly GRC is flexible enough to cope with any drainage requirement.

Richard Longbottom, technical director, Polytech Systems, comments:'Poly GRC is aimed at multi-phased industrial sites, where there is a high risk of installed channels being damaged by construction traffic or heavy slow moving vehicles post-completion.

While much stronger than polymer concrete, it remains a cost effective choice, especially as the channel replacement rate will be significantly reduced'.

A choice of systems is available, spanning the full range of load classes, from A15kn-F900kn.

Poly GRC-G100 is a galvanised edge channel and grating system, with an internal width of 100mm and depths ranging from 160mm to 210mm.

The GRC-D channel and grating system has a ductile edge and is supplied with standard internal widths ranging from 100mm to 300mm and depths from 160mm to 400mm.

Polytech offers free technical advice on selecting the most appropriate channel product for a specific requirement.

For further information on Poly GRC or other channel products in the Polytech portolfio, please call 01925 639 058 or visit the website.

Polytech Systems: contact details and other news
Email this article to a colleague
Register for the free Buildingtalk email newsletter
Buildingtalk Home Page

Search the Pro-Talk network of sites

Visit the Brett Martin Daylight Systems web site