Product category:
Electrical Services
News Release from: QHi Group | Subject: Exertherm system
Edited by the Buildingtalk Editorial
Team on 04 May 2007
Continuously thermally monitor
electrical power
QHi Group has developed the Exertherm system, based on unique infrared sensors.
Periodic thermal imaging has been accepted as "best practice" for live inspection of mission-critical assets for many years It is based on the fact that increased heat is a common symptom of impending failure in both electrical and mechanical equipment
This article was originally published on Buildingtalk on 26 Aug 2003 at 8.00am (UK)
Related stories
24/7 Thermal Monitoring For Switchgear
For many organisations, a major power failure can have catastrophic economic and/or safety consequences. New IR Technology now provides 24/7 thermal monitoring for switchgear.
Exertherm Lifetime Calibration/Warranty
QHi Group's Exertherm continuous thermal monitoring system will be supplied with Lifetime Calibration and a Lifetime Warranty - an industry first.
Until recently it was the best available technology.
However, thermal imaging fails to address two key issues.
First, inspections are generally made once per year leaving 364 days completely unmonitored.
Further reading
New HVAC Automation Provides Seamless Connectivity
ABB's drives for the HVAC sector are now supported by software drivers for the Compass protocol conversion system, from North Communications.
mCERTs Approval For ABB Continuous Gas Analysers
The range of Continuous Gas Analysers and systems manufactured and marketed by ABB Limited has recently been certified to the latest mCERTs standards.
Second, where the equipment is within an enclosure as with electrical switchgear and Uninterruptible Power Supplies (UPS) for example, the measurement is taken on the external panel surface, NOT the actual equipment.
In today's high-downtime-cost environment, the first point leaves far too much time to detect the problem accurately prior to failure.
The second point requires the operator to rely on a "fudge factor" to correlate the results.
For many organisations these issues are not too important, but for those with potentially high downtime costs, such as data centres and continuous manufacturing processes, they are absolutely vital.
Now, QHi Group, a company with a background in infrared technology has developed the Exertherm system, based on unique infrared sensors.
These small, plastic bodied, low cost devices require no external power source and work just like a standard thermocouple but are non-contact.
The sensor signals are fed back via 8-input channel data acquisition cards which linearise, condition and convert the output signal into industry standard Modbus protocol.
This enables fast and easy integration with virtually all SBMS/SCADA systems.
There is also an optional Modbus TCP/IP (Ethernet) output to enable real time on-line remote access to data.
Bad connections are the single greatest source of electrical failure or arc flash and the Exertherm sensors can be placed INSIDE electrical enclosures to monitor key problem areas such as Circuit Breakers (ACB, MCB, MCCB) and critical busbar joints.
Now for the first time, high-downtime-cost organisations can continuously thermally monitor their mission critical electrical power and mechanical assets such as bearings, pumps, gearboxes, compressors, motors and the like.
The sensors are not affected by high vibration levels as they are non-contact and being placed INSIDE electrical enclosures means they are monitoring the actual equipment.
No compromise and no operator dependence means consistent, reliable data to detect potential problems BEFORE failure and avoid the associated high downtime costs which result.
• QHi Group: contact details and other news
• Email this article to a colleague
• Register for the free Buildingtalk email newsletter
• Buildingtalk Home Page
Search the Pro-Talk network of sites
