Product category:
Refurbishment
News Release from: Spaceway South | Subject: Part L2B of the building regulations
Edited by the Buildingtalk Editorial
Team on 05 February 2008
Part L2B of the building regulations
Malcolm Jeary, Managing Director of the Spaceway Group reviews Part L2B of the building regulations two years on.
All new building regulations are almost guaranteed to send those involved into a spin, and this is proving the case with Part L2B that came into effect on the 6th April 2006 Designed to conserve fuel and power in existing buildings other than dwellings, all fit out work carried out on existing buildings may need a different approach
This article was originally published on Buildingtalk on 16 Nov 2004 at 8.00am (UK)
Related stories
Clear Winner With Brita Water Filter Systems
Spaceway, has helped create a stylish and practical office environment for leading water filter manufacturer Brita, at the company's new 62,500 sq ft purpose built headquarters in Bicester.
Totally managed fit-out ensures profits on track
Spaceway's totally managed fit-out of drinks accessory company The Waiters Friend ensures profits remain on track.
The most controversial part of L2B is proving to be the consequential improvements aspect to buildings larger than 1000m2.
This is where an improvement to one element of the building triggers general improvements to another, subject to the technical and economic criteria.
A new building fitted out to category A standard has to fulfil Part L2A.
Further reading
Spaceway fitout of new headquarters
Spaceway shows off its fitout of Wiggle's new headquarters .
Spaceway Designs fit out Delacamp UK headquarters
Spaceway South has won the contract to fit out a prestigious and functional UK headquarters for Delacamp
Spaceway delivers stylish new HQ for Airconco
Rundown structure transformed by Spaceway, a leading UK provider of integrated interior space solutions.
But the subsequent tenant fit-out has to comply with part L2B, which could trigger consequential improvements.
Taken literally, adding a new fan coil to an office that has had the partitioning changed could trigger consequential improvements, although this is plainly nonsensical.
This is why it is important that the fitout company knows its way around L2B regulations.
One of the key requirements to Part L2B is: "To provide energy efficient and properly commissioned fixed building services with effective controls".
When considering improvements, the general requirement is to consider all thermal elements including heat gains and losses through thermal elements and other parts of the building fabric as well as pipes, ducts and vessels used for space heating, space cooling and hot water services.
Insulation is at the top of the agenda when approaching the fitout of offices in an existing building.
It is important that all walls are insulated to improve insulation including stud and track walls.
It is also important to insulate dry lined walls and ceilings.
When considering where to site offices within an existing structure, it is important to reflect on whether or not the office will be located in an existing heated area.
If the building is being enlarged, for example by the installation of a mezzanine floor or by building offices in a stores area, which does not have heating, then it is important that heat and cooling losses in the newly created offices meet Part L2B.
Should the area have a concrete floor, then the regulations state that insulated raised access floors should be used, where feasible, to improve thermal quality.
Regardless of efficiency, all heating and cooling systems should be upgraded if more than 15 years old.
Lighting controls also play an important factor in L2B regulations.
Any general lighting system with average lamp efficiency of less than 40 lamp lumens/circuit Watt should be upgraded by either a new luminaire or with improved lighting controls.
Controls should be provided in order to avoid unnecessary lighting during times when daylight levels are adequate.
Automatically switched lighting systems should be subject to risk assessment for safety reasons.
Energy saving lamps are also available for most situations.
The thermal performance of windows and doors also need to be considered.
The L2B regulations stated that where windows, roof windows, roof light or doors are to be provided, with reasonable provision being given to draught proof units.
In order to comply with the new regulations it is normally necessary to replace existing windows and doors.
Economic feasibility requires a simple payback not exceeding 15 years.
Simple payback is the amount of time it will take to recover the initial investment through energy savings and is calculated by dividing the marginal additional cost of implementing an efficiency measure by the value of annual energy savings achieved by the measure.
Part 2LB gives effective examples which includes upgrading most heating, cooling and air-handling systems which are over 15 years old.
Introduction or increases to micro-generation systems (low and zero carbon technologies or LZC) are considered economically feasible if they have a pay back period of 7 years or less.
The list of challenges in the development of existing office and public buildings is extremely long both in terms of project management and technical success.
Balancing regulations and guidelines for energy performance, indoor climate, acoustic and lighting conditions whilst maintaining flexible use of space and improved working conditions within sustainable and attractive buildings can prove to be problematical.
For this reason it is important the company's moving to or developing an existing building refer to specialist fitout companies such as Spaceway South to ensure that they meet Part L2B of the building regulations.
• Spaceway South: contact details and other news
• Email this article to a colleague
• Register for the free Buildingtalk email newsletter
• Buildingtalk Home Page
Search the Pro-Talk network of sites
