Product category:
Floors
News Release from: Schluter-Systems | Subject: Ensuring Tiled Floors Are Waterproof
Edited by the Buildingtalk Editorial
Team on 14 September 2004
Ensure Your Tiled Floors Are Waterproof
Ian Knifton, Technical Manager for Schluter-Systems - world market leader in tiling solutions - answers your questions on ensuring that tiled floors are waterproof.
During the last couple of months we've looked at how the use of polyethylene membranes are vital to ensure the long-life of tiling installations over timber, cracked, contaminated and green screeds These versatile underlayments not only provide the perfect solution to uncouple floor tiles from problematic substrates, preventing them from cracking, splitting and debonding -- they have another very important use: waterproofing tiled surfaces
This article was originally published on Buildingtalk on 11 Apr 2008 at 8.00am (UK)
Related stories
Ceramic Tile Distributors new Glasgow showroom
Showroom floor was tiled with Vitra 440 x 440 Cemento Mink and a number of Schluter profiles were specified to ensure the installation's long-lasting integrity.
Award-winning underfloor heating system
John Croft has installed Schluter-Bekotec-therm under all 1,470 square metres of flooring at his luxury eco-house in the Cotswolds.
Ian Knifton, Technical Manager for Schluter-Systems -- world market leader in tiling solutions -- answers your questions on ensuring that tiled floors are waterproof.
Question.
I'm installing a tiled floor in a bathroom, and will be using impervious grout and water-resistant adhesive, so I don't need to worry about any other form of waterproofing, do I? Answer.
Further reading
Penthouse owner shows sound taste
Tiling contractors Maurice Parker installing the acoustic membrane Schluter-DITRA-SOUND to cut the impact sound perception by more than half.
Single room pack fast-tracks underfloor heating
Two special versions of Schluter-Systems' award-winning underfloor heating system have been developed for small extensions and conservatories.
Stone floor cracking or debonding from substrate
Ian Knifton, Technical Manager at Schluter - Systems, says very often stone floors crack or debond because installers have not fitted an uncoupling membrane, or movement joints correctly
Impervious grout and water-resistant adhesive don't necessarily stop water seeping through into the fabric of a building, especially where modern, high-performance power showers throw out a lot of water at high force.
So, yes, you do need to ensure that the installation waterproofed.
Question.
How can I do that? Answer.
The British Standards Institution (BSI) recommends the use of impervious membranes such as the polyethylene Schluter-DITRA.
BSI also says that further advice should be sought from specialists in the waterproofing field.
As the world market-leader in tiling accessories, Schluter is regularly called upon by specifiers to advise about waterproofing on particular projects.
Generally, waterproofing is a matter of education -- first of all about the overall need for it, and secondly which type of membranes to use.
Question.
What sort of damage can occur if the installation isn't properly waterproofed? Answer.
We were recently discussing a problem at a private house where water was dripping heavily from a first-floor shower cubicle into a garage below every time the power shower was used.
The sealant between the shower base and tiled wall was leaking, meaning water was finding its way to the room below.
It's discoloured the plaster on the garage ceiling and wall -- no real problem in a garage -- but what if it had been a lounge? A correctly installed waterproofing membrane prevents this damage.
Question.
Installing these protective membranes obviously helps flooring contractors make more profit, but from the customers' point of view it all adds to the cost of the job.
How can we convince our customers that they are necessary? Answer.
Anyone who's suffered water damage because of the lack of waterproofing would readily agree that prevention is better than the cure.
How about including photographs of damage caused by water seepage in your portfolio.
Then when you're discussing price with customers you can illustrate the waterproofing option.
Question.
How easy are these membranes to install? Answer.
Schluter-DITRA is a polyethylene sheet with an anchoring fleece laminated to the underside.
After ensuring that the substrate is even and load-bearing, the bonding adhesive is applied with a 3mm x 3mm or 4mm x 4mm notched trowel.
While the type of bonding adhesive depends on the type of substrate, for most substrates a dry-set tile adhesive is suitable.
The fleece on the underside of the membrane needs to be solidly embedded into the adhesive so that its entire surface is bonded.
Work the membrane into the adhesive, in just one direction, using a float or screed trowel.
The tiles can be laid on top immediately afterwards, by anchoring the adhesive into the square cavities.
Question.
Are there any alternatives to using impervious membranes? Answer.
Other forms of waterproofing include brush-applied liquid.
This, essentially, does the same job as the flexible membranes quoted in the BSI code, but will normally take longer, because each coat usually requires a drying time before tiling can start. Request a free brochure from Schluter-Systems ...
• Schluter-Systems: contact details and other news
• Email this article to a colleague
• Register for the free Buildingtalk email newsletter
• Buildingtalk Home Page
Search the Pro-Talk network of sites
