Product category:
Floors
News Release from: Schluter-Systems | Subject: Schluter-DITRA-SOUND
Edited by the Buildingtalk Editorial
Team on 10 January 2007
New sound insulation gives durable tiled
surface
Newly-launched Schluter-DITRA-SOUND acoustic floor product not only reduces noise, but actually protects the tiled surface as well.
A newly-launched acoustic floor product not only reduces noise, but actually protects the tiled surface as well, overcoming one of the major problems of tiling onto acoustic floors Schluter-Systems Technical Manager Ian Knifton says: "To put a rigid finish, such as tiles, over a surface that is very compressible, is asking for trouble: usually the grout lines would crack first, then the tiles would crack at the joints, and finally debond"
This article was originally published on Buildingtalk on 11 Mar 2008 at 8.00am (UK)
Related stories
Penthouse owner shows sound taste
Tiling contractors Maurice Parker installing the acoustic membrane Schluter-DITRA-SOUND to cut the impact sound perception by more than half.
Ceramic Tile Distributors new Glasgow showroom
Showroom floor was tiled with Vitra 440 x 440 Cemento Mink and a number of Schluter profiles were specified to ensure the installation's long-lasting integrity.
However, Schluter-DITRA-SOUND which reduces the impact sound of floor constructions (test values according to DIN EN ISO 140-8), was specially designed to ensure that the tiled surface is highly durable.
As an accessory to the standard Schluter-DITRA uncoupling membrane, it is a bonded impact sound insulation for tile coverings, made of a heavy polyethylene mat, which has an anchoring fleece laminated on both sides to bond with the tile adhesive.
The heavy polyethylene material absorbs much of the impact sound created by walking, for example, and substantially reduces the "drum-roll effect" of sound being reflected off hard surfaces.
Further reading
Award-winning underfloor heating system
John Croft has installed Schluter-Bekotec-therm under all 1,470 square metres of flooring at his luxury eco-house in the Cotswolds.
Single room pack fast-tracks underfloor heating
Two special versions of Schluter-Systems' award-winning underfloor heating system have been developed for small extensions and conservatories.
This makes it ideally suited both for new build and refurbishment projects.
As well as providing impact sound insulation, Schluter-DITRA-SOUND protects the tiled surface by bridging cracks in the substrate which are not expected to widen significantly, ensuring that those cracks are not transferred to the tiles.
And because the material is a heavy matting that cannot be compressed, it is suitable for applications of up to 5kN/m2.
In order to install Schluter-DITRA-SOUND correctly, the substrate must be level, ready to bear weight, and free of all substances that may weaken the bond.
Any levelling must be completed prior to the installation.
The Schluter-DITRA-SOUND self-adhesive edge strip should be used where the covering adjoins walls and other upright construction elements, to avoid the buildup of tensions or the formation of sound bridges.
The thin-bed adhesive used for bonding the acoustic material must be selected to suit the substrate type.
It must bond well with the substrate and mechanically set and cure in the anchoring fleece of Schluter-DITRA-SOUND.
Standard dry-set adhesives are suitable for most substrates, but do check for any incompatibility of materials.
Apply the adhesive over the substrate with a notched 3 x 3 mm or 4 x 4 mm trowel.
Cut Schluter-DITRA-SOUND to size and fully embed the anchoring fleece into the applied adhesive.
Immediately press the material into the adhesive with a float or roller, working in a single direction.
The individual panels should be set tightly next to each other.
Remove any excess adhesive.
To avoid sound bridges, cover all joints with the self-adhesive joint covering, Schluter-DITRA-SOUND-KB.
Walking boards are recommended for taking material over the installed acoustic material, and to prevent it from peeling off the substrate.
Uncoupling membranes and the tiles can then be installed in the normal way. Request a free brochure from Schluter-Systems ...
• Schluter-Systems: contact details and other news
• Email this article to a colleague
• Register for the free Buildingtalk email newsletter
• Buildingtalk Home Page
Search the Pro-Talk network of sites
