Visit the Renderplas web site
Click on the advert above to visit the company web site

Product category: Builders Merchants
News Release from: Severnside Safety Supplies | Subject: Arblite lightweight clothing
Edited by the Buildingtalk Editorial Team on 02 November 2005

Arblite lightweight chainsaw users
clothing

Request your FREE weekly copy of the Buildingtalk email newsletter. News about Builders Merchants and more every issue. Click here for details.

Arblite lightweight protective clothing is around 33% lighter than most other currently available clothing.

Arblite lightweight clothing for chainsaw users Arblite lightweight protective clothing is around 33% lighter than most other currently available clothing

This includes trousers with all round protection to European Norm EN 381-5 Design C Class 1, jackets to EN 381-11 Class 1 and front protection trousers and bib and brace to EN 381-5 Design A Class1.

Arblite clothing combines proven traditional materials with new such as Kevlar and Teflon to produce hardwearing, comfortable, lightweight protective garments.

Design C trousers, as required for arborists and untrained chainsaw users, feature protection, incorporating Kevlar, for the front and back of the legs.

They have elasticated waists with buttons for braces, and hip and leg pockets with flaps.

One of the pocket flaps has a label inside for such information as users name and blood group! Three different types of outer material are used, including Teflon for water repellency, and a ventilated seat area for increased comfort.

Currently these are available in blue with yellow trim.

The matching protective jacket conforms to Class 1 despite it's lower weight - most jackets are only Class 0.

Sizes S - XL This means the jackets, in test conditions, are not cut through at a chains speed of 20 m/s (Class 1) as opposed to 16 m/s (Class 0) Design C bib and brace will be introduced in the very near future.

The Design A (front protection) garments are a more traditional green in colour with orange trim.

These are required for trained chainsaw operators working on the ground whereas those climbing trees (or other unusual practises!) need all round protection (Design C).

However they incorporate the same technology to produce lightweight, hardwearing comfortable garments.

All arblite trousers and bib and brace are usually available in waist sizes 30" to 44" with a 32" inside leg.

Garments up to 50" waist are available to order but this currently involves a wait of around 6 weeks.

Similarly different leg lengths are available - 29", 30" and 31" at no extra cost.

33" and 34" cost an extra 20% - 35, 36, 37 and 38" an extra 25%.

As time goes on Severnside will be keeping a wider range of sizes based on demand.

The first step in this direction is to be a small stock of 32" and 36" waist trousers in both Design A and Design C with the 34" inside leg.

The new arblite range of lightweight chainsaw trousers and jackets is the perfect complement to their existing range of Fristads forestry clothing from Sweden as well as chainsaw boots from Treemme in Italy, Steitz Secura in Germany, Skooga in Scandinavia and Hunter (as in the green wellies!) in Scotland.

Chainsaw helmets, with muffs and visor attachments and chainsaw gloves are available meaning that all chainsaw users can get the protection the law requires ( and common sense demands) from one source.

Severnside Safety Supplies: contact details and other news
Email this article to a colleague
Register for the free Buildingtalk email newsletter
Buildingtalk Home Page

Search the Pro-Talk network of sites

Visit the Renderplas web site