Product category:
Infrastructure and CAD Software
News Release from: SolidWorks Corporation
Edited by the Buildingtalk Editorial
Team on 23 February 2006
COSMOSFloWorks fluid flow analysis
software
Ability to see flow of gasses, liquids, and heat helps customers anticipate and correct flaws early in the design process.
Ability to see flow of gasses, liquids, and heat helps customers anticipate and correct flaws early in the design process 22, 2006 3/4 Lasers, undersea vehicles, networking gear, and medical devices are just a few of the products manufactured for less money and with fewer quality errors thanks to COSMOSFloWorks fluid dynamics analysis software
This article was originally published on Buildingtalk on 12 Jul 2006 at 8.00am (UK)
Related stories
Bullet on wheels designed in SolidWorks
Human-powered vehicle, to be pedaled by Ironman triathlete, was tested in COSMOSFloWorks' 'virtual wind tunnel' to develop and optimize it for an attempt on the 24-hour distance record.
Free alternative to new AutoCAD upgrades
More than 100,000 AutoCAD software users download free compatibility solution from SolidWorks Corporation
COSMOSFloWorks analysis enables engineers to simulate and study the flows of liquids, gasses, and heat through their designs before they commit to building expensive physical prototypes.
By simulating the fluid flows, designers can determine whether gasses circulate through a machine as planned, whether heat flows through a product quickly enough to prevent overheating, or whether a product exhibits the expected aerodynamic qualities.
If COSMOSFloWorks analysis reveals a problem, designers can modify their design and run more COSMOSFloWorks analysis to determine if it works, rather than manufacturing a new prototype to test each iteration.
Further reading
COSMOS software helps aquarium research
COSMOS software helps Monterey Bay Aquarium Research Institute design instrument arrays that withstand crushing ocean depths
Stadium roof design with software is longest
M G Bennett and Associates is using SolidWorks Office Professional software to design key foundations for the new Wembley Stadium roof, which will be the longest opening roof structure in the world.
SolidWorks 3D design and COSMOS design analysis
National Oilwell Varco and Andergauge use SolidWorks 3D design and COSMOS design analysis software to speed time to market, reduce errors and cut costs.
Nanometrics, the U.S.Department of Energy's Los Alamos National Laboratory, and Sonus Networks are among the engineering organizations that use COSMOSFloWorks to cut costs and accelerate design cycles.
Calgary-based Toppings Engineering designs products for a wide range of industries, most notably Canada's oil industry.
Owner Barry Toppings' recent project was developing drilling equipment and coring tools.
He used COSMOSFloWorks to determine how the equipment would endure the pressure, temperature, and erosion of the drilling fluids.
"I used AutoCAD LT before, and I didn't realize going from 2D to 3D would be such an advantage," Toppings said.
"I was pretty good at visualizing things in 3D, but building them in 3D is a huge leap in getting it right the first time".
Toppings recently used COSMOSFloWorks to design a measurement while drilling (MWD) device for a Canadian oil field service company.
The device is mounted near the drill bit.
It sends coded sequences of pressure pulses through the drilling mud to the surface so operators know where the drill bit is in relation to the rig floor.
Toppings used COSMOSFloWorks to simulate the torque and forces the MWD device would face, and used the findings to modify his design.
COSMOSFloWorks saved him from traveling to other cities for expensive physical tests that would have required him to build a prototype and mount sensors in a flow loop.
Toppings estimates that COSMOSFloWorks saved him at least $50,000 in the development of this MWD tool.
Another COSMOS customer, a medical device manufacturer, Drager Medical, avoided a potentially costly design flaw by using COSMOSFloWorks to analyze the gas flow through a ventilation unit that it was re-designing from aluminum into plastic.
The COSMOSFloWorks analysis revealed that gasses were not mixing in a chamber as expected, but flowing side by side.
Drager engineers added deflector ribs that mixed the gasses, and then tested the new design with COSMOSFloWorks before producing a final prototype.
"COSMOSFloWorks takes an inherently complicated task and makes it easy enough for anyone in the design process to perform," said Suchit Jain, SolidWorks vice president of analysis products.
"Ease of use combined with the accurate results COSMOSFloWorks delivers gives product designers a trustworthy alternative to extensive prototyping".
"Every time we help a customer eliminate a prototype it significantly cuts costs and time to market while raising quality".
"More and more companies are turning to analysis software as they realize how much it adds to their design processes.".
• SolidWorks Corporation: contact details and other news
• Email this article to a colleague
• Register for the free Buildingtalk email newsletter
• Buildingtalk Home Page
Search the Pro-Talk network of sites
