Product category:
Gas Services
News Release from: Techniquip | Subject: Deltaflux shunt type flow meter
Edited by the Buildingtalk Editorial
Team on 08 December 2005
Low cost flow transmitter for larger
pipes
Deltaflux shunt type, glass tube variable area flowmeter, offers the most cost-effective method of accurate fluid flow measurement in both gases and liquids in larger pipes up to 200mm.
Shunt type, glass tube variable area flowmeter, offers the most cost-effective method of accurate fluid flow measurement in both gases and liquids in larger pipes up to 200mm Manufactured by Influx Measurements and distributed by Techniquip the Deltaflux shunt type flow meter use the same technique of monitoring the float position in the glass tube using a field sensor as the tried and tested in Reflux models
This article was originally published on Buildingtalk on 1 Nov 2005 at 8.00am (UK)
Related stories
Release gas flow monitor for energy management
Techniquip introduce the CMG series gas flow monitor.
The two wire 4-20mA loop 24vdc powered output allows remote transmission of flow rate, for use in discrete indicator, controller, SCADA and BMS systems.
Flow ranges available from 2 m3/hr and 20 Nm3/hr Air in a 38mm pipe up to 1000 m3/hr H20 and 7000 Nm3/hr Air in a 200mm pipe.
The loop-powered transmitter is available with EEXia (ATEX) certification for use in hazardous areas Pressure rating up to 20 bar is standard.
The float is still visible as in a conventional glass tube variable area flowmeter, retaining the normal flow indication often preferred by site operators.
The Deltaflux flow transmitter brings the advantages and low cost of variable area technology into modern electronic control systems.
• Techniquip: contact details and other news
• Email this article to a colleague
• Register for the free Buildingtalk email newsletter
• Buildingtalk Home Page
Search the Pro-Talk network of sites
