Product category:
Materials
News Release from: Toolcraft Plastics (Swindon) | Subject: Moulded Plastics
Edited by the Buildingtalk Editorial
Team on 01 April 2003
New Thermoplastic Environmentally Safe
Products
Toolcraft Plastics of Swindon, in conjunction with material developers PVAXX, have been trialing both biodegradable and bio-compostable materials.
The biodegradable properties of polyvinyl alcohol (PVOH) particularly as it comes into contact with water, have been known for a number of years Commercially viable volumes of compostable polymer material based on it however, have only recently become available in a workable dry pellet form and of consistent quality
This article was originally published on Buildingtalk on 8 Jul 2004 at 8.00am (UK)
Related stories
Composite Underpinning System - An Instant Success
Abbey Pynford's new Composite Underpinning system proved an instant success in rectifying a problem in Sunderland.
Structural Monitoring Programme Ensures Success
AV Technology, have carried out a comprehensive six month monitoring programme to assess the condition of a 50 metre stretch of retaining wall on the river Hull.
The 'rediscovery' as a thermoplastic has high potential for the production of environmentally acceptable disposable parts.
Toolcraft Plastics of Swindon, in conjunction with material developers PVAXX, have been trialing both biodegradable and bio-compostable materials, to establish the mould conditions for high product quality and cost economy.
By definition, the biodegradable material will ultimately break down into carbon dioxide, water and biomass within a specific time.
Further reading
Team Effort Ensures Bridge Strengthening Success
AV Technology have successfully completed the first two stages of a complex monitoring program for Farrans Construction during strengthening and refurbishment work on Foyle Bridge in Northern Ireland.
RIBA Approval For Bauer's Flood CPD
The first CPD on flooding to be accredited by RIBA has been launched by Bauer Inner City.
Bauer Flood Defence System Gets Royal Approval
Royal approval is given to a UK first in community flood defence - a highly engineered system that is effective when needed and practically invisible when not.
As compostable it must also contain no toxic materials, the break down time must be less than 12 weeks, and the resulting compost must not impede plant growth.
Toolcraft have wide experience with moulding engineering plastics including some of the lesser used materials and unusual fillers, and the results of tests on the four injection moulding grades of biodegradable materials tried have been startling.
With the high standards of production quality control, Toolcraft were able to run them on existing production lines and equipment, achieving mould times as low as 50% of runs with standard materials, whilst retaining a high quality of finished product.
These polymer materials have been shown to be similar to conventional polymers in both thermal characteristics and many mechanical parameters, including flexural modulus, tensile and impact strength.
Other product qualities include optimum viscosity and melt flow, the absence of static build up, and have non-toxic, safe-to-handle qualities and first rate print adhesion and weldability.
The net result of trials at Toolcraft is substantially lower parts cost with all the advantages of the familiar engineering plastics.
The crucial property of the material, however, is its unique capacity to biodegrade and compost into non-toxic residues.
The injection moulding materials trailed by Toolcraft degrade when coming into contact with water, the rate of degradation being temperature dependant, that is, faster degradation in hot water.
This property gives the materials the ability to provide a major contribution to the fundamental ecological issue in the disposal of plastics with a significant impact on the problems posed by materials with an indefinite lifespan.
These biodegradable and compostable polymers have received European safety approval for food contact, further extending their value.
All materials trailed to date accept a full range of colours.
Most importantly the degradation period, which can be adjusted by grade choice and coatings, commences only when the part comes into contact with moisture.
Other moulded applications currently being evaluated include golf tees, garment hangers and medical disposables.
Some materials include mouldable sheet which could enhance Toolcraft's range of industrial storage trays.
Whilst most materials tested worked well in conventional tools, Toolcraft's experience in the design and running of mould tools and a tool room in-house proved invaluable throughout the trials.
Toolcraft are now able to work most biodegradable materials with confidence.
• Toolcraft Plastics (Swindon): contact details and other news
• Email this article to a colleague
• Register for the free Buildingtalk email newsletter
• Buildingtalk Home Page
Search the Pro-Talk network of sites
