Product category:
Pipes
News Release from: Radius Systems
Edited by the Buildingtalk Editorial
Team on 18 July 2008
New purge pressure tee from Radius
Systems
New purge pressure tee for gas purge points and bypass connections has been launched by Radius Systems (previously Uponor).
It provides an innovative solution to the challenge of making a safe, quick and simple connection for purge and pressure points and temporary bypass loops for polyethylene pressure pipes A compact factory-made electrofusion fitting, the purge tee has been specifically developed to save time and reduce waste on site, and is so easy to use that no extra training is required to fit it
This article was originally published on Buildingtalk on 9 Apr 2008 at 8.00am (UK)
Related stories
New profuse PET tool from Uponor
Uponor new, entry-priced pipe exposure tool (PET) is suitable for all diameters of ProFuse pipe.
All fittings are approved to gas specification requirement PL2: PART 4, which guarantees delivery of a quality product with long-term integrity.
Benefits for installers are the ongoing consistency and quality of the fitting, ensuring safe work in less time.
The fitting is also smaller than any combination of products currently used for site-based constructions, reducing the risk of third-party damage, too.
A full range is available in all the sizes for which connections are required, including a 40mm to 500mm range for the 1-inch connection, and a 63mm to 500mm range for the 2-inch connection.
Other benefits of the new fitting include non-sparking plastic threaded closure caps with nitrile O ring seals to prevent gas ignition risk.
No 'snatch' operation is required, either.
Unifit range rated bases are capable of working on more than one pipe size, minimising stockholding.
• Radius Systems: contact details and other news
• Email this article to a colleague
• Register for the free Buildingtalk email newsletter
• Buildingtalk Home Page
Search the Pro-Talk network of sites
