Noise reduction with Vent-Axia ventilation

Noise Action Week supported by Vent-Axia ventilation solutions

  • 31 May 2016

  • Share

Noise Action Week took place last week, with the support ventilation manufacturer, Vent-Axia, as part of its commitment to the control and reduction of sound levels.

Noise Action Week focuses on the problems that excessive noise can cause. Equally committed to reducing sound levels, Vent-Axia was happy to support the initiative, which took place from 23-28 May.

The company utilises a sound laboratory and computational fluid dynamics to ensure that its ventilation solutions are both efficient and quiet in operation.

Noise control and ventilation solutions

Vent-Axia is dedicated to providing alternative ventilation solutions to noisy extract fans. Operating at 14dBA, its Silent Fan boasts the Noise Abatement Society’s Quiet Mark 2016; it has been designed to provide both acoustic and ‘visual’ silence, with an unobtrusive, slimline design.

Meanwhile, the company’s Lo-Carbon Revive has been designed to cater for the social housing sector. Its Multi-Vortex technology incorporates a hybrid impellor, which ensures discreet and continuous operation. The fan works to remove moisture and stale air, providing good indoor air quality and comfort for tenants.

For the new build sector, Vent-Axia has developed its Sentinel Kinetic Advance Mechanical Ventilation with Heat Recovery (MVHR). Near silent in operation, Advance also benefits from time-saving commissioning and control, via a web-enabled app.

The system features trickle settings of up to 40%, which will stay below 20dBA. It boasts a specific fan power (SFP) as low as 0.38W/l/s, combined with 93% heat recovery and a high pressure airflow of 100l/s at 150Pa.

Leave a Reply

More articles

Delta Electronics

Delta's M300 range: compact, advanced and cost-attractive

Delta Electronics has launched the new M300 range of Drives, designed for the most basic to the most advanced applications.

Posted in Articles, Building Industry News, Building Products & Structures, Building Services, Building Systems, Hand Tools, Innovations & New Products, Plant, Equipment and Hire, Posts, Power Tools

  • Share
Screen Shot 2018-02-23 at 12.54.44

A call for collaboration in timber innovation

In the latest issue of ABC&D, Metså Wood looks at further advancing the use of wood in mainstream construction with the sharing of knowledge and innovation.

Posted in Articles, Building Industry News, Building Products & Structures, Building Systems, Features, Timber Buildings and Timber Products

  • Share

Insulation for Islington cadets from IKO plc

IKO PLC’s ‘Fix that Hut’ scheme has seen Islington & Stoke Newington Sea Cadets centre donated more than 250 square metres of IKO enertherm PIR insulation to them.

Posted in Articles, Building Industry News, Building Products & Structures, Insulation, Posts, Restoration & Refurbishment, Retrofit & Renovation, Roofs, Sustainability & Energy Efficiency

  • Share

Aggregate Industries expands Southern operations with acquisition of Kendall Group

Aggregate Industries, a member of the LafargeHolcim Group, has acquired the aggregate and ready-mix concrete manufacturer, the Kendall Group.

Posted in Articles, Building Industry News, Building Regulations & Accreditations

  • Share