Put simply, retrofitting a heat pump involves upgrading or supplementing your current heating system with a heat pump. This can be done in most buildings, including commercial, residential, and industrial properties, with air source heat pumps being especially popular due to their lower costs and straightforward installation process.
There are a number of factors to consider when deciding whether to retrofit a heat pump into a commercial building, and thankfully, the age of a building isn’t too much of an issue. Older buildings can definitely be retrofitted with heat pumps; the key is selecting the right type of heat pump and refrigerant that aligns with the building’s characteristics, and the owner’s goals.
When it comes to retrofitting, a building’s insulation is important; Good insulation that effectively reduces heat loss means only a smaller, more efficient heat pump would be needed. While heat pumps can be sized to meet any heat demand, a building with better insulation would result in lower operational costs of a heat pump system.
Depending on your current heating system, you might be able to reuse existing pipework. That being said, radiators might need resizing or replacing, particularly if the heat pump operates at lower temperatures than your old boiler system.
These are just a few of the considerations around building suitability, but it’s a good place to start when thinking about whether or not you can retrofit a heat pump.
The retrofit process starts with a system designer conducting heat loss calculations to determine your building’s heating needs. They’ll then design a bespoke solution to meet these requirements with minimal disruption. Opting for a refrigerant with a temperature differential close to that of traditional boilers, like R290 (propane), can make the retrofit smoother.
Heat pumps are incredibly efficient, often achieving a Coefficient of Performance (COP) between 3 and 5. This means they can produce three to five times more heat than the electricity they consume. In contrast, gas boilers usually operate at around 80% efficiency.
Even though electricity is more expensive than gas, the efficiency of heat pumps can lead to significant savings on energy bills. You can further reduce costs by using renewable energy sources, like solar power, to run the heat pump.
Switching to a heat pump can drastically reduce your business’s carbon footprint. Even though much of the UK’s electricity still comes from fossil fuels, the growing share of renewable energy in the National Grid boosts the environmental benefits of heat pumps.
Choosing the right refrigerant is also an important step. Natural refrigerants like R290, for instance, don’t contribute to climate change, ozone depletion, or release harmful PFAS chemicals, making them an environmentally friendly option.
Heat pumps typically last 15 to 20 years, outliving traditional boilers that usually last 10 to 15 years. Using natural refrigerants ensures compliance with future environmental regulations, protecting your investment from becoming obsolete due to regulatory changes.
Heat pumps are versatile. They can provide both heating and hot water and work well with various emitters at low surface temperatures, enhancing comfort and efficiency.
Retrofitting a heat pump offers a host of benefits for businesses, from increased efficiency and cost savings to environmental sustainability and future-proofing. The process can be straightforward, especially with the right system designer and refrigerant choice. With available financial assistance and the potential for significant long-term gains, retrofitting heat pumps is a smart investment for businesses looking to upgrade their heating systems, and a step in the right direction for the country’s goals to protect and preserve the environment.
Rising average temperatures and increasing rainfall levels encourage biological growth, so now is the time to act to protect your house’s kerb appeal, says Safeguard Europe…
Posted in Articles, Building Industry News, Building Products & Structures, Building Services, Damp & Waterproofing, Facility Management & Building Services, Render, Restoration & Refurbishment, Retrofit & Renovation, WallsASSA ABLOY Opening Solutions UK & Ireland is highlighting its commitment to youth development by recognising the growth and contributions of one of its team members, Callum Starkey, a Quantity Surveyor within the commercial team.
Posted in Architectural Ironmongery, Articles, Building Industry Events, Building Industry News, Building Products & Structures, Building Services, Doors, Facility Management & Building Services, Recruitment, TrainingReynaers Aluminium UK, a leading supplier of sustainable architectural aluminium systems, has unveiled a new RIBA-approved Continuing Professional Development (CPD) seminar focused on curtain walling systems.
Posted in Aluminium Products, Articles, Building Industry Events, Building Industry News, Building Products & Structures, Building Regulations & Accreditations, Building Systems, Continuing Professional Development (CPD's), Curtain Walling, Information Technology, Innovations & New Products, Restoration & Refurbishment, Retrofit & Renovation, Seminars, Sustainability & Energy Efficiency, Training, WallsThe need for greater fire resiliency in flat roofs – this piece comes from Pete Hollingworth, Commercial Manager for DensDeck® products in Europe on behalf of GP (Georgia-Pacific) and Fellow of The Institute of Roofing (FIoR)…
Posted in Articles, Building Industry News, Building Products & Structures, Building Regulations & Accreditations, Building Systems, Health & Safety, Posts, Restoration & Refurbishment, Retrofit & Renovation, Roofs, Sustainability & Energy Efficiency