As therapeutic spaces for individuals in need of extended care, mental healthcare facility designs are meant to promote the safety and recovery of their service users.
To achieve that, you’ll need careful attention to the design goals and considerations of a mental healthcare facility. Certain mental health products, such as specialised TV cabinets and heating systems, are essential components that contribute to the overall well-being of the service users.
Here are the safety features you should find in mental health products…
The primary objective of incorporating safety features and self-harm resistance designs in mental healthcare facilities is to eliminate any potential risks of self-harm and create a safe space for everyone in the facility. This approach not only ensures the protection of patients but also acknowledges the well-being of healthcare staff, allowing them to concentrate on providing high-quality care without undue concern for potential hazards.
While heating systems are integral to maintaining a comfortable environment in mental healthcare facilities, conventional radiators that are not purposefully designed for mental healthcare settings can inadvertently become ligature points that pose a risk for self-harm among patients. Specialised radiator covers equipped with anti-ligature grilles can eliminate such risks.
The anti-ligature grilles should adhere to specific standards, such as the IP3X, outlined in the BSEN 60529. Grilles featuring 2mm holes at 4mm centres in a triangulated pattern can effectively prevent the insertion of objects larger than 2.5mm in diameter, such as cords, wires, and shoelaces, significantly mitigating the potential for ligature-related risks.
It’s always recommended to choose radiator covers with a sloped top design as a proactive step to mitigate self-harm. This design discourages individuals from using them as climbing aids, preventing unauthorised access to elevated areas and minimising the potential for injurious falls. This simple yet strategic design modification can have a significant impact on patient safety, effectively reducing the likelihood of self-harm incidents.
It’s important to keep gaps and joints minimum in the design of your choice of mental health products and heating system components, especially in highly secure mental health settings, as even a small 2mm gap can become a potential stash point.
This can be achieved through a full frame design and anti-pick mastic sealing. It could deter patients from tampering with these vulnerable points, which could otherwise be exploited for creating stash points or concealment of contraband, to maintain the safety of both the service users and your staff.
Another strategic approach to reducing gaps and joints, particularly relevant to heating systems, is bespoke sizing. Customising the dimensions of heating system elements ensures a snug fit, leaving no room for the concealment of medications or any prohibited items. That eradicates the possibility of stash points and significantly enhances overall security measures.
Any mental health products with exposed wall and floor fixing points present a critical security concern, as they can be dismantled and potentially wielded as weapons by service users. This poses a risk of self-harm or harm to others within the facility, including staff and fellow residents.
Incorporating secure locks and internal fixings prevents such attempts, helps to uphold the integrity of the space and contributes significantly to maintaining a secure and safe environment within the facility.
Maintaining a clean and hygienic environment is fundamental to curbing the spread of Hospital Acquired Infections (HAIs) within your facility. Incorporating anti-microbial features into essential components like heating system design, alongside the integration of easy cleaning designs prevents the build up of bacteria. This is particularly useful when handling “dirty protests” and preventing hygiene problems caused by deferred maintenance.
Antimicrobial additives, such as silver-based technologies, will work continuously to inhibit microbial growth once added to the coating. The antimicrobial property offers an additional layer of protection to reduce the risk of service users contracting infectious diseases.
A healing environment for mental healthcare patients hinges on safety and security. Elements like material selection, fixture placement, and design features all collectively contribute to this foundation. The inclusion of anti-ligature grilles, slope top designs, full frame structures, bespoke sizing, secure locks, and antimicrobial properties will enhance patient well-being and relieve healthcare staff of potential hazards.
DeepClean Extra is a specialist range of heating solutions designed and engineered to minimise the risk of self-harm and for installation in secure environments, such as mental health facilities, prisons, SEN Schools, custody and remand units.
Removing potential tamper opportunities and ligature points in locations such as these, are key considerations. The anti-ligature design incorporates IP3X-rated grilles tested by a UKAS-accredited laboratory and certified to protect against the ingress of objects greater than 2.5mm in diameter. Anti-ligature TRV kits are also available to allow service users to take control of their heating to increase comfort levels.
Get in touch today and book a free consultation with a Contour heating expert to discuss anti-ligature heating solutions for your facilities.
Contour can be contacted at;
Tel: 01952 290 498
Email: [email protected]
Two Grade II Listed heritage buildings in the London Borough of Harrow have been home to the prestigious North London Collegiate School since 1929 – they have decided to invest in Selectaglaze glazing solutions.Posted in Aluminium Products, Articles, Building Industry News, Building Products & Structures, Building Systems, Case Studies, Glass, Glazing, Interior Design & Construction, Interiors, Posts, Restoration & Refurbishment, Retrofit & Renovation, Sustainability & Energy Efficiency, Windows
Newton Waterproofing, a leading supplier and designer of waterproofing solutions for large-scale commercial and infrastructure projects, ensured a dry future for the London School of Economics (LSE) on a basement project.Posted in Articles, Building Industry News, Building Products & Structures, Building Services, Case Studies, Damp & Waterproofing, Facility Management & Building Services, Floors, Membranes, Restoration & Refurbishment, Retrofit & Renovation, Site Preparation, Sustainability & Energy Efficiency, Walls, Waste Management & Recycling
CUPA PIZARRAS has installed a range of CUPACLAD® rainscreen cladding on the Cambridge Country Club building, in Cambridgeshire.Posted in Articles, Building Industry Events, Building Industry News, Building Products & Structures, Building Systems, Case Studies, Cladding, Continuing Professional Development (CPD's), Facades, Restoration & Refurbishment, Retrofit & Renovation, Walls
The latest total value sales figures from Builders Merchant Building Index (BMBI) show that Q4 2023 sales were -5.7% down compared to Q4 2022, with volumes falling -12.0% and prices rising +7.1%.Posted in Architectural Ironmongery, Articles, Bathrooms & Toilets, Bathrooms, Bedrooms & Washrooms, Building Associations & Institutes, Building Industry News, Building Products & Structures, Building Services, Doors, Drainage, Hand Tools, Health & Safety, Heating Systems, Controls and Management, Heating, Ventilation and Air Conditioning - HVAC, Interior Design & Construction, Interiors, Kitchens, news, Paints, Paints, Coatings & Finishes, Pipes, Pipes & Fittings, Plant, Equipment and Hire, Plumbing, Power Tools, Restoration & Refurbishment, Retrofit & Renovation