Dryzone Damp-Resistant Plaster application

Dryzone Damp-Resistant Plaster offers salt migration control

  • 15 Feb 2016

Safeguard Europe’s Dryzone System of damp remedials and protection has benefited from the addition of its Dryzone Damp-Resistant Plaster

Developed to offer an alternative to traditional plasters, Dryzone Damp-Resistant Plaster is a breathable, pre-blended solution; it has been designed with a porous structure to control dampness and salt migration in walls.

The plaster, which can be applied to structures while they are still damp, allows walls to dry out by evaporation. Application can also result in higher thermal resistance, which can, in turn, reduce the risk of condensation in a building.

Applied in two layers as a 5mm anchoring rough coat and a 15mm top coat, the plaster works to a time scale of 30 to 60 minutes, depending on variable factors, such as humidity and temperature.

A 2mm skim coat can be added to the application after 24 hours.

Dryzone Damp-Resistant PlasterEnhancing Safeguard’s Dryzone System

Safeguard’s Dryzone System can benefit from the product: it can be used for replastering purposes, after Dryzone Damp-Proofing Cream or Dryrod Damp-Proofing Rods have been applied.

The plaster can also be used to replace existing plaster that has deteriorated. By applying it in new-build and conversion projects, contractors can limit potential damage caused by minor ingress of dampness.

The plaster’s low compressive strength ensures that it can be easily removed at a later date, without causing any damage to underlying brickwork.

Contact:

Safeguard Europe,
Redkiln Close,
Horsham,
West Sussex,
United Kingdom,
RH13 5QL

Phone: 01403 210204
Fax: 01403 217529

Visit Safeguard Europe's website

Leave a Reply

Latest news

Nationwide Windows

Nationwide launch next generation GRP fire door range

Nationwide Windows & Doors has devoted time, clever product design and testing at levels never previously seen to launch its next generation GRP fire door range.

Posted in Access Control & Door Entry Systems, Articles, Building Industry News, Building Products & Structures, Doors, Health & Safety, Innovations & New Products, Retrofit & Renovation, Security and Fire Protection, Windows

Aggreko

2020 weather data proves humidity concern for construction say Aggreko

Data showing spiking humidity levels on construction sites are a growing concern for the sector, according to a new report from temporary power company, Aggreko.

Posted in Articles, Building Industry News, Building Services, Facility Management & Building Services, Health & Safety, Heating Systems, Controls and Management, Information Technology, Posts, Research & Materials Testing, Site Preparation, Thermal Imaging and Monitors

Kingspan

Kingspan chosen for affordable housing scheme

Leading housing provider Stonewater is taking full advantage of the excellent thermal efficiency of Kingspan Kooltherm K108 Cavity Board at a new affordable housing development in Dorset.

Posted in Articles, Building Industry News, Building Products & Structures, Building Services, Case Studies, Insulation, Restoration & Refurbishment, Retrofit & Renovation, Walls

Freefoam

The Power of Many: national supply, local service from Freefoam

Freefoam has strong ties with contractors, architects and specifiers, thanks to its ‘The Power of Many’ approach.

Posted in Articles, Building Industry News, Building Products & Structures, Cladding, Posts, Restoration & Refurbishment, Retrofit & Renovation, Roofs, Walls