Glazing Vision

Glazing Vision Flushglaze Eaves Rooflight features in London project

  • 22 Feb 2022

Designed and orchestrated as a modern and creative build, Pitched Black is a four-bedroom family home. Located in a conservation area in South London and bounded on one side by a railway cutting, the site posed many design and logistical challenges. The property is owned by Rhys Cannon, the director of Gruff Architects and features a Glazing Vision Fixed Eaves Rooflight.

Mr Cannon bought the property from a builder whom he had worked with on many previous occasions, who originally asked Mr Cannon to investigate the property’s potential for development. Then, he decided that the opportunity was too good to pass over and made an official offer to buy. After this, a lengthy negotiation process ensued – that lasted two years.

This long period of time gave Mr Cannon the time to think about the property and its potential for growth. So, he drew up plans with specific details regarding how he wanted the house to be laid out and constructed.

The owners had lived in the property for ten years, during which time they had updated the existing kitchen but retained its original position within the house. A rear conservatory, ‘tacked on’ to the closet wing by previous owners, only served to emphasise the lack of connection between inside and outside.

The first floor, clad in black timber boards, is pitched 10 degrees away from the boundaries to diminish the perceived mass of the building from the neighbouring gardens.

The glazing is to the side and rear, with no windows on the front faction. The house’s primary outlook is therefore the tree-lined railway. This offers the house a panoramic vista of ‘private green space’ a rare house a panoramic vista of ‘private green space’ a rare commodity in a built-up suburban area of London.

After construction was well underway, Mr Cannon and Gruff Architects looked for more opportunity for natural light in the home. Having no windows on the front elevation meant that they looked towards the possibility of obtaining a fixed Rooflight to allow a natural flow of light through the home – this is when they contacted Glazing Vision.

Imran Sabur, of Gruff Architects, comments: “Gruff Architects have worked with Glazing Vision on many other residential projects over a number of years.”

Mr Cannon and Gruff Architects decided to use the Fixed Eaves Rooflight for the soon to be family home. The Glazing Vision Eaves Flushglaze Rooflight comprises of two or more glazed sections – installed in both vertical and horizontal planes and joined together with a structural silicone seal.

The Eaves Flushglaze is a unique rooflight, in terms that it has two whole glass panes. Its benefits are that it allows a substantial amount of daylight into the room it is located.

Imran Sabur adds: “The rooflight was situated in one of the children’s bedrooms, which did not have a standard window for reasons of privacy.”

The Eaves Rooflight consequently helped frame the view of green space towards the rear of the site, whilst allowing light into the room throughout the day. However, there was one technical challenge regarding the Rooflight. The fact that it was pitched at a 10-degree angle from the vertical meant that it was ever so slightly sloped, meaning that the Rooflight may appear slanted.

The entire project took roughly five years to be finished. Now, Pitched Black is a famous name in and amongst the construction industry. The project has gained traction from multiple sources and has been covered extensively in the architectural press.

For example, it has featured on Architecture Today’s articles page, a feat that is certainly impressive.

From start to finish the project was executed with precision, detail and thought. The Eaves Rooflight helps give a wonderful level of natural daylight and provides a consistent flow throughout the family home. The result of the project is outstanding to say the least and is a breath of fresh air into the construction industry.

Contact:

 

Glazing Vision Ltd,
Sawmills Road,
Diss,
IP22 4RG

01379 658 300

[email protected]

 

Visit the Glazing Vision website

Leave a Reply

Latest news

MCRMA

Tata Steel UK announced as latest new MCRMA member

Tata Steel UK, and Building Systems UK, the construction product manufacturer of Tata Steel UK, has renewed its membership of the MCRMA – the industry association which represents metal cladding and roofing manufacturers.

Posted in Articles, Building Associations & Institutes, Building Industry News, Building Products & Structures, Building Systems, Cladding, Curtain Walling, Facades, Restoration & Refurbishment, Retrofit & Renovation, Roofs, Steel and Structural Frames, Walls

Freefoam

Freefoam Building Products Introduce New Agate Grey Single Shiplap PVC Cladding

Freefoam Building Products, a leading manufacturer of PVC building products, is proud to announce the launch of its latest product – the Agate Grey Single Shiplap PVC Cladding.

Posted in Articles, Building Industry News, Building Products & Structures, Building Systems, Cladding, Doors, Drainage, Guttering, Soffits & Fascias, Fascias, Innovations & New Products, Restoration & Refurbishment, Retrofit & Renovation, Roofs, Walls

Insight Data

Insight Data: Increase profit margins by accessing high quality data

Alex Tremlett, Insight Data’s Commercial Director, explains how the quality of prospect data that construction firms use in the hope of securing leads can make all the difference between consistent conversions, and echoing sales silence…

Posted in Articles, Building Industry News, Building Services, Information Technology, Posts, Research & Materials Testing

Purplex

Purplex: The importance of building a memorable brand

Andrew Scott, MD and founder of Purplex Marketing, shares his thoughts on how businesses within the construction industry can make their business stand out in a crowded marketplace…

Posted in Articles, Building Industry News, Building Services, Information Technology, news, Posts, Research & Materials Testing