REHAU

REHAU: New analysis to measure carbon emissions of transporting district heating and plumbing pipework

  • 30 Mar 2022

With decarbonisation legislation continuing to tighten in the UK, polymer specialist REHAU has carried out a CO2 emissions analysis for contractors to measure emissions accrued from transporting district heating pipework and plumbing pipework to construction sites.

REHAU has highlighted these findings, in which emissions can be lowered by up to 67% through informed material choice, in order to raise awareness of the hidden environmental costs of construction, including transportation.

CarbonCare emissions calculator

Based on data from the CarbonCare emissions calculator and informed by BS EN 16258 standards for environmental management, the analysis approximates the weight of polymer versus traditional materials systems using industry averages.

The analysis uses a typical journey from London to Manchester to estimate transportation emissions in two scenarios and further improve contractor decision-making processes – firstly with polymer versus steel district heating pipes, and then against copper plumbing pipes.

As the construction sector is reviewing all its processes to see how best to meet ambitious decarbonisation targets, this material use and its associated carbon emissions is coming under the spotlight, says Steve Richmond, Head of Marketing and Technical at REHAU Building Solutions.

Steve adds: “The whole construction industry is in a process of rapid decarbonisation, and while this is welcome news, there are certain its processes that are being overlooked as part of this.

“Material transportation is a great example of a topic that does not get the consideration it deserves, as carbon emissions are often only measured once products are on site.

“However, this should not be the case – all components, large and small, must arrive at district heating and plumbing projects through some form of freight, even if these parts are made in the UK. It is therefore crucial that specifiers select lighter, high-performance materials and solutions if they are to further reduce emissions in line with stringent sustainability targets.”

In the case of district heating pipework, the analysis found that polymer pipes can cut carbon emissions by up to 67% against steel for the sample projects REHAU reviewed.

Government’s Sixth Carbon Budget

For plumbing, MLCP pipes can reduce the carbon emissions from freight by up to 35% – key savings when taking into account 2050 net zero targets brought forward by initiatives such as the Government’s Sixth Carbon Budget.

“As further emphasised in the analysis, it is beyond dispute that the weight of a material does have a significant impact on carbon emitted during transportation.

“For example, polymer pipes are significantly lighter than their copper and steel counterparts, and this is reflected in their reduced pollutive potential when in transit.

“All organisations in the supply chain must therefore be aware of the savings available through opting for less cumbersome materials. While information such as Environmental Product Declarations are vital to ascertaining the sustainability benefits of certain products, we need to provide additional data across an entire project, including transportation, on-site and post-construction, ongoing building emissions.

“By building up a clearer picture, we can help contractors make better decisions that make the construction sector more environmentally friendly and better able to hit net zero targets. This analysis is a key step towards that goal, and we encourage contractors working on heating and plumbing systems to make use of it where they can.”

For more information about the new emissions analysis, click here.

Contact:

REHAU
Hill Court,
Walford,
Ross on Wye,
Herefordshire,
HR9 5QN

Email address: [email protected]
Tel: 01989 72600

Visit REHAU's website

Leave a Reply

Latest news

Abloy
Renderplas

Renderplas shadow gap beads throw shade

For architects and designers looking to avoid traditional skirting boards, architraves and cornices, Renderplas offers its range of PVC plasterboard shadow gap beads for dry lining systems.

Posted in Articles, Building Industry News, Building Products & Structures, Floors, Interior Design & Construction, Interiors, Posts, Render, Restoration & Refurbishment, Retrofit & Renovation, Walls

MCRMA

First MCRMA members’ roadshow takes place at Siderise

Members of the MCRMA, the trade association for the metal cladding and roofing industry, had an exclusive opportunity to explore and discuss the changes affecting the construction sector at the first of the association’s roadshow events hosted by Siderise at its HQ and manufacturing facility in South Wales.

Posted in Articles, Building Associations & Institutes, Building Industry Events, Building Industry News, Building Products & Structures, Building Regulations & Accreditations, Building Services, Cladding, Exhibitions and Conferences, Health & Safety, Restoration & Refurbishment, Retrofit & Renovation, Seminars, Walls

BMBI