Rinnai’s range of ErP A-rated continuous flow gas-fired hot water heaters now includes models specifically aimed and designed for the UK domestic market.
The units guarantee high efficiencies and low running costs, combined with consistent water temperatures, seven days a week.
Rinnai’s range of continuous flow water heating units are being specified and installed in the whole range of domestic properties – studios, flats, houses, high-end residential houses – as installers and end users become aware of the ease of installation, and the energy & cost saving benefits.
Rinnai manufactures over two million water heaters every year and, as such, is at the forefront of creating unit cost advantages for installers.
Competitively priced, the units offer all technological advances and innovations, all at a similar cost to lower specification competitor models.
The reason for the increase in popularity is due to the fact continuous flow heating systems are proven to be more energy efficient than conventional ones and are now the preferred method of hot water provision.
Rinnai units meet the demands of any size of home and are ideal where high volumes are demanded at intermittent times of the day, delivering safe temperature useable hot water.
Rinnai’s multipoint 17i water heater, for example, eliminates the problem of sudden changes in water temperature, resulting in cold showers or scalding hot baths; the water temperature that is set is the water temperature the user will get.
So, if somebody is happily showering at 42°C and a tap is turned on to draw a bath elsewhere in the property, the temperature does not vary, and there is no chance of either user running out of hot water.
The Rinnai 16i interior model measures just 675 x 370 x 139mm and weighs in at 18kg – a one-man lift. The room-sealed unit has a temperature range of 35°C to 60°C with direct electronic ignition.
Gas consumption ranges between 4.7kW-6.5kW for Natural Gas and 4.9kW-36.8kW when using propane.
Hot water delivery flow is an impressive 16ltr max flow. Nominal operation pressure is 1-7 bar and it uses a 230V AC 50Hz 1ph power supply with an electrical consumption of 68W.
Meanwhile, where an external installation is required, the Rinnai 17e external multipoint water heater offers greater flexibility at the design stage and offers a viable solution where flue runs are problematic or internal space is not available.
Capable of flow rates of up to 510 litres per hour at a 50°C rise, the 17e is suitable for multiple applications and can be specified for use with Natural Gas or propane.
The 17e has full frost protection and is available with a range of external ancillary items, including pipe cover box – and security cage where necessary.
For smaller properties, the Infinity 11i interior unit differs from the 17i, as it weighs 2kg less at 16kg and consumes 6.10kW-21.60kW of Natural Gas and has an 11-litre maximum flow.
– Compact & lightweight unit for easy installation
– Robust, durable heat exchanger
– User friendly digital controls
– In-built frost protection
– Ideal replacement for large obtrusive and bulky cylinder
– Compact design to fit a limited space.
Understanding how much ‘recycled’ air is in a room can help establishments estimate the risk of infection from diseases such as COVID-19, says Tinytag…Posted in Air Conditioning, Articles, Building Industry News, Building Services, Facility Management & Building Services, Heating, Ventilation and Air Conditioning - HVAC, Information Technology, news, Research & Materials Testing, Site Preparation
Young offender institutions (YOI) must address the actions that are causing extensive strain on the correctional system in the UK today, explain Contour…Posted in Articles, Building Industry News, Building Services, Facility Management & Building Services, Health & Safety, Heating Systems, Controls and Management, Heating, Ventilation and Air Conditioning - HVAC, Interiors, Plumbing, Retrofit & Renovation
The GGF has issued revised guidance for Home Improvement companies and sub-contractors operating in England during the current National Lockdown.Posted in Articles, Building Associations & Institutes, Building Industry News, Building Products & Structures, Building Regulations & Accreditations, Building Services, Facility Management & Building Services, Glass, Glazing, Health & Safety, Interiors, news, Restoration & Refurbishment, Retrofit & Renovation, Site Preparation, Windows
Exploring how the building envelope can support the reduction in energy usage can help the construction industry achieve zero-carbon buildings, says Vincent Matthews, Head of UK Marketing at SFS.Posted in Articles, Building Industry News, Building Products & Structures, Building Systems, Facades, Posts, Restoration & Refurbishment, Retrofit & Renovation, Sustainability & Energy Efficiency, Walls