Bradley Markham, director at Bull Products, a manufacturer of life-saving fire protection equipment, has shared a five-step checklist for construction site managers and health and safety professionals to consider.
This comes as the Health and Safety Executive say construction remains one of the most hazardous industries, accounting for a quarter of all fatal injuries to workers in the UK.
Construction employs 2.2 million people and relies heavily on its dedicated work force – therefore, it is vital that the industry takes all the necessary steps possible to ensure a safer working environment.
Here are the five steps…
First and foremost, it is imperative at the start of any project to identify all the risks involved ahead of the work that is being carried out. Conducting a full risk assessment will ensure all employees involved are aware of any hazards that may pose a risk to workers.
Following the risk assessment, it will become much clearer on exactly which products your site requires to ensure maximum site safety and best practice.
From fire extinguishers to alarm systems, through to first aid equipment and spill kits, having the right equipment could mean the difference between life and death.
Fire extinguishers are one of the most important products to have on site. If you’re unsure of which fire extinguisher to have on site, you’re not alone.
A recent survey carried out by our team revealed that more than 38% of workers are using the wrong type of fire extinguisher on an electrical fire, while more than 10% would use a foam extinguisher to put out an electrical fire. However, Bull’s mission is to help you ensure your site is compliant.
The list of safety products your site may require are endless but each one will prove vital when it matters the most.
Workers should play a large part in managing health and safety risks. Therefore, training your staff is fundamental so that accidents and injuries are avoided.
Access to first aid can help an injured person make a quicker recovery and even save lives. If your employees become ill or fall injured at work, there is a legal requirement for you to provide appropriate equipment, facilities and personnel to administer the first aid.
First-aid arrangements should cover shifts, night and weekend working so managers may need to appoint or train several people to ensure adequate cover.
Falls are the most common cause of death in the construction industry and account for 50% of fatalities. Before any work is completed at a height, it is crucial to take precautions to prevent or reduce the risk of injury.
A package of products from Alumasc Water Management Solutions (AWMS) has been used for the external refurbishment of the roofline at Weston General Hospital in Weston-Super-Mare.
Posted in Aluminium Products, Articles, Building Industry News, Building Products & Structures, Building Services, Building Systems, Case Studies, Cladding, Drainage Services, Drainage, Guttering, Soffits & Fascias, Fascias, Restoration & Refurbishment, Retrofit & Renovation, Roofs, WallsHush Acoustics has invested in the safety and sustainability of its commercial vehicle fleet by achieving Gold status in the Fleet Operator Recognition Scheme (FORS).
Posted in Acoustics, Noise & Vibration Control, Articles, Building Industry News, Building Products & Structures, Building Regulations & Accreditations, Building Services, Ceilings, Facility Management & Building Services, Floors, Health & Safety, Insulation, Restoration & Refurbishment, Retrofit & Renovation, Site Preparation, Sustainability & Energy Efficiency, Walls, Waste Management & RecyclingAs Safeguard gets ready to deliver another informative session of one of its most popular webinars, the company outlines some of the most common reasons for rain penetration through brickwork.
Posted in Articles, Bricks & Blocks, Building Industry Events, Building Industry News, Building Products & Structures, Building Services, Continuing Professional Development (CPD's), Damp & Waterproofing, Facility Management & Building Services, Information Technology, Posts, Render, Restoration & Refurbishment, Retrofit & Renovation, Seminars, Training, WallsThe Joint Competency Initiative (JCI), in which the Automatic Door Suppliers Association (ADSA) is involved, is finalising its first framework for installers within the door, gates and shutter industry.
Posted in Access Control & Door Entry Systems, Architectural Ironmongery, Articles, Building Associations & Institutes, Building Industry Events, Building Industry News, Building Products & Structures, Building Regulations & Accreditations, Building Services, Continuing Professional Development (CPD's), Doors, Facility Management & Building Services, Health & Safety, Innovations & New Products, Publications, Research & Materials Testing, Restoration & Refurbishment, Retrofit & Renovation, Security and Fire Protection, Site Preparation