Passivhaus: It’s all in the seal

  • 28 Oct 2016

Guest blog: Malcolm Taylor, Product Manager, REHAU

So much effort has been put into educating specifiers about the benefits of Passivhaus construction by companies like REHAU that there is now a really vibrant community of advocates and supporters driving the expansion of the sector.

pr2135-specialist-tapes-such-as-these-from-tremco-illbruck-are-available-for-passivhaus-window-installataionsWhere I think more effort now needs to be focused however, is in educating installers both about the opportunities which this sector presents and the specific technical demands, so that we build sufficient competent and experienced capacity in the market.

REHAU’s focus of course is on the correct installation of our Passivhaus certified windows and doors, with the overriding consideration being to ensure that the windows are air tight in a way which is not required in a conventional installation.

We advise that the most effective method of sealing a window is with a three level system which provides an external breathable weather tight seal, thermal (and sound) insulation to the area between the frame and reveal, and an internal airtight seal.  This follows the principle of ‘inside tighter than outside’ which allows the natural pressure gradient to move air and moisture vapour to the outside of the construction and avoids condensation and potential mould damage.

For the external breathable seal, specialist foam tapes are available impregnated with resins which improve their resistance to weather ingress.  These provide a high level of driving rain resistance, but are vapour permeable, allowing any trapped moisture to escape to the outside and, with the tape set back from the joint face, they form an unobtrusive seal.

Intelligent Flexible Membranes come with a variable ‘sd’ value (vapour diffusion-equivalent air layer thickness) and are available in different widths and with different fixing systems so that they can accommodate movement.   Membranes made from EPDM (Ethylene Propylene Diene Monomer) have been used for years both externally to provide protection against the weather and UV and internally for airtightness.  The material is available in thicknesses between 0.7 – 1.25mm generally, but the most popular for interface sealing is 0.70 – 0.75mm. This is usually considered strong enough and is more easily formed at corners and around brackets than the thicker options. 

pr2135-getting-an-air-tight-seal-around-the-windows-is-key-to-the-success-of-a-passivhaus-projectInternally, it’s often necessary to patch the membrane over a bracket to maintain the continuous air tight seal which Passivhaus specifications demand.

All too often, the middle insulation area is given less consideration than for weather or airtightness but avoiding thermal bridging here is a fundamental consideration, as is maximising acoustic insulation.  

There are also specially formulated impregnated tapes available which our experience shows can actually do the job of three separate products.  Not only do these combined tapes achieve the three level sealing required but they can typically be installed in only 20% of the time taken to install three products.

REHAU presented a seminar on this topic at this week’s Passivhaus Conference at the London Business Centre and the positive response and the number of questions it raised suggested that there is a real desire from installers to learn more which is very encouraging.

Leave a Reply

Latest news

Mitsubishi Electric

Mitsubishi Electric: 8 out of 10 homeowners still using gas

UK consumers still overwhelmingly rely on carbon-intensive home heating systems, and 79% use a gas boiler. Just 4% of homeowners use an air-source heat pump in their homes – all according to a new survey from Mitsubishi Electric and Censuswide.

Posted in Air Conditioning, Articles, Building Industry News, Building Products & Structures, Building Services, Facility Management & Building Services, Heating Systems, Controls and Management, Heating, Ventilation and Air Conditioning - HVAC, Innovations & New Products, Pipes & Fittings, Plumbing, Publications, Research & Materials Testing, Retrofit & Renovation, Sustainability & Energy Efficiency

Breathing Buildings
Recofloor

Recofloor celebrates 15 years of vinyl recycling success

Leading vinyl take back scheme, Recofloor, has been celebrating 15 years of successful recycling. Launched in 2009 as a collaborative initiated by manufacturers Altro and Polyflor, Recofloor collects both offcuts and uplifted vinyl for recycling.

Posted in Articles, Awards, Building Industry Events, Building Industry News, Building Products & Structures, Building Services, Floors, Site Preparation, Sustainability & Energy Efficiency, Waste Management & Recycling

Purplex

Purplex Founder & MD on the power of specialist marketing

Andrew Scott, MD of construction-focused, full-service agency Purplex, explains how deep industry expertise and offering tailored campaigns outperforms one-size-fits-all approaches every time.

Posted in Articles, Building Industry News, Building Products & Structures, Building Services, Information Technology, Innovations & New Products, Research & Materials Testing