West Fraser

West Fraser SterlingOSB Zero PrimedPlus selected for cathedral contract

  • 2 Apr 2024

A Suffolk-based scaffolding and flat roofing specialist has chosen SterlingOSB Zero PrimedPlus from West Fraser for the hoardings around repair works at the St Edmundsbury Cathedral site in Bury St Edmunds.

Pro-Flat Specialist Services serves clients across much of East Anglia in the domestic, commercial and specialised historic buildings sectors. In this instance, English Heritage contacted the team when stone masons were required to carry out repairs to the centuries-old limestone walls.  

Given the highly visible location where worshippers and the wider public pass in large numbers, the cathedral authorities wanted the scaffolding and the work itself to be smartly screened off.

Pro-Flat contacted Falcon Timber in High Wycombe, its regular supplier of board materials, to discover that the merchant had West Fraser’s new SterlingOSB Zero Primed Plus product available, which is fully prepared to avoid the need for painting on site.  

A full pack of 50 boards was delivered to the site, for Pro-Flat’s experienced operatives to proceed with screw-fixing them to a supporting framework of timbers, braced off the scaffold. 

West Fraser

‘Easy to work with’

The Director in charge of the work for Pro-Flat Specialist Services commented: “As well as installing three-layer felt and hot bonded roofing systems, a lot of our work is focused on historic buildings across Suffolk, North Essex, South Norfolk and East Cambridgeshire, where there are many ecclesiastical and other properties in the care of English Heritage.  

“When we were asked to erect a hoarding around the works at St Edmundsbury Cathedral, we spoke to one of Falcon Timber’s advisers who recommended the new SterlingOSB Zero PrimedPlus which definitely saved us time as it is easy to work with and was delivered to us pre-primed and therefore cut down labour on site.”

As a sturdy board which is ideal for the construction of screening and walkways, either for privacy or to fulfil health & safety requirements, SterlingOSB Zero PrimedPlus is well able to withstand the inclement British weather too.

About SterlingOSB Zero

As with all West Fraser’s SterlingOSB Zero products, no extra formaldehyde is used during the manufacturing process, so it is safe to specify in hospitals, schools and other public realms.  Furthermore, its ultra-smooth surface means the boards can be adorned with graphics so can be used to offer directional information as well as branding, promotional material and artwork.

Primed in the factory, in either a neutral white or grey paint, the edges of the OSB3 boards are treated with a sealant on all edges to protect against water ingress while the UV-resistant putty layer applied offers even further weather protection as well as enhancing the ultra-smooth finish.  Being knot and void free due to the rigorous manufacturing process means they will cut cleanly while being easy to fix and durable. 

The boards are supplied in packs of 50 to cover a total area of approximately 150 m2, with each measuring 1220 mm wide by 2440mm long and at 18mm thickness.  

SterlingOSB Zero PrimedPlus is CE-marked and complies with the Forestry Stewardship Council (FSC® (C012533)) and BBA Agreement requirements while being manufactured in the UK enhances security of supply and sustainability.

For further information, call 01786 812 921 or visit https://uk.westfraser.com/

Leave a Reply

Latest news

ADSA
ASSA ABLOY
HMG
Abloy